CAMBRIDGE EM830 Series User Manual page 5

FUNC
DCV ACV DCA
MODEL
EM830
EM830B
EM830C
EM830D
means squarewave signal output function
means sinewave signal output function
INSTRUCTIONS
1. Display
3 ½-digit LCD, with a max. reading of 1999
2. Function / Range Switch
Used to select the desired function and range as well as
to turn on or off the meter. To save battery life, set this
function/range switch to the "OFF" position when the
meter is not in use.
3. "COM" Terminal
Plug in the black test lead connector for all measure-
ments except temperature measurements. For tempera-
ture measurements, this "COM" terminal is a plug-in
connector for the negative plug of the K type thermocouple.
4. "VmA
Plug in the red test lead connector
for all measurements except
temperature measurements and
current measurements
For temperature measurements,
"VmA " is a plug-in connector
for the positive plug of the K type
thermocouple.
5. "10A" Terminal
Plug in the red test lead connector for
current (200mA - 10A) measurements.
" Terminal
TEMP
1
200mA.
2
5 1
BATT
5
4
3