Remote Control Keys - Philips 37PF5321/10 Manual

Remote Control keys

1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
Standby
To set the TV to standby mode. To switch the
TV set on again, press
P – / + or AV key.
2 Unused key in TV mode
3
DVD / AUX (see page 6).
4 Surround Sound
To activate / deactivate the surround sound
effect. In stereo, this gives the impression that
the speakers are further apart. For models
equipped with Virtual Dolby Surround, you can
experience Dolby Surround Pro Logic sound
effects.
5
Telextext keys (see page 14).
6 AV
To display Source List to select TV or peripheral
equipment connected to EXT 1, EXT 2/SVHS2,
EXT 3/SVHS3, EXT 4, HDMI 1 or HDMI 2.
AUX
15
16
17
18
19
20
21
22
23
, to
.
7 Active Control
8 MENU
To call up or exit the TV menus.
9 Cursors
These 4 keys are used for selection and adjustment
of menu items.
10
OK
Confirms selection.
11
Volume ( – VOL + )
To adjust the sound level.
12 Smart Picture /Sound
Used to access a series of predefined picture
and sound settings (see page 13).
13
/ Numerical keys
For direct access to programmes. For a 2
digit programme number, the 2
be entered before the dash disappears.
Screen information
14
To display/remove the programme number,
the sound mode, the remaining time of the
sleeptimer and the *signal strength indicator.
Press key for more than 5 seconds to display
information permanently on screen and press
key again for more than 5 seconds to remove
information.
15 Mode
Select between TV, DVD and AUX mode (see
"Remote Control - DVD or AUX on page 6).
Programme List
16
To display / clear the list of programmes.
Use the Î ï keys to select a programme and
the Æ key to display it.
17
Picture-in-Picture
To display a PIP window on the TV screen (see
page 10 on how to use the PIP feature).
Sound mode
18
Used to force programmes in Stereo
and Nicam Stereo to Mono or, for
bilingual programmes, to choose between
,
Dualå or Dual». The Mono indication is red
when in forced position.
Screen Format
19
20 DVD / AUX (see page 6).
21 Mute
Press to mute or restore sound.
22
Selecting TV programmes (P – / +)
To select the next or previous programme.
The number and the sound mode
are displayed for a few seconds.
TV programmes, the title of the programme appears
at the bottom of the screen.
23 Previous/Present programme
To alternate between the last viewed and
present programme.
* The signal strength indicator shows
the signal strength of the transmission
of the programme you are watching.
(
See page 13).
digit must
nd
(see page 12).
For some
5