Advertisement
Available languages
Available languages
Recommended installation:
CAR SEATS
remove back harness panel.
•
STROLLERS
keep back harness panel
•
in place.
Place the Bundleme
or stroller. Fasten the elastic strap
around the back of the car seat
or stroller. Be sure to install strap
under any attached canopies.
Do not adjust the elastic strap
too tightly - there should not be
a gap between the back of the
Bundleme and the car seat
or stroller.
in car seat
®
If your car seat has built-in head
support, you may place the
Bundleme (with back harness
panel removed) around the
head support. This may not be
possible in all car seats.
Unzip sides and fold down the
top of the Bundleme.
Advertisement
