Cleaning And Maintenance; Technical Data; Warranty - BUILD X-ELL JS 400 User Manual

Cleaning and maintenance

Before performing any work on the equipment, pull the power plug.
Cleaning

Keep the ventilation slots of the machine clean to prevent overheating of the engine.

Regularly clean the machine housing with a soft cloth, preferably after each use.If the dirt
does not come off use a soft cloth moistened with soapy water.

Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Maintenance
Our machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and regular
cleaning.

Technical data

Voltage/ Frequency
Input power
Bevel capacity
Maximum cutting capacity
No load speed
Accoustic level
Storage

Thoroughly clean the whole machine and its accessories.

Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.

Protect it from exposure to direct sunlight. Keep it in the dark, if possible.

Don't keep it in plastic bags to avoid humidity build-up.

Warranty

This warranty covers all material or production flaws excluding:

batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes,
cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ;

damage or defects resulting from maltreatment, accidents or alterations; nor the cost
transportation.

We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.

Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike, erroneus
net voltage. This list is not exhaustive.
230-240V ~ 50Hz
400W
°
+ / - 45
wood 55 mm lemn / steel 3 mm
500– 3000 RPM
68 dB(A)
9