Advertisement
Product Operation
Manual Backup and Restore
1. Please ensure that "Auto Mode" is turned off
before connecting the ICE-9NKY series device to
the switches. To disable this function, log into the
switch web console and navigate to Switch > Tools
> N-Key, then uncheck the "Auto Mode" option.
2. After Auto Mode is disabled, the N-Key Status
dropdown menu with three options will be shown.
Status
N-Key is idle
Backup the current
configuration to N-Key
Restore the N-Key
configuration settings to
the switch
3. After selecting the N-Key Status from the
dropdown menu, click Apply. The ICE-9NKY
series device will then begin the configuration
backup/restore process, during which the system
LED will blink slowly. The process may take 1 ~ 2
minutes to complete.
4. When the system LED stops blinking, the
ICE-9NKEY series device can be disconnected
from the switches.
WARNING
Do not remove the ICE-9NKY series device
while the SYS LED is blinking.
Ensure that the switches are powered on before
initiating the automatic backup function.
Description
Do nothing
Backup the current
configuration settings to
N-Key
Restore the N-Key
configuration settings to the
switch
Startup Manual 3
Advertisement
