Ambient Recording Clockit Master Slate ACD101 Manual

Advertisement

Quick Links

AMBIENT CLOCKIT MASTER SLATE ACD101
The ambient compact Clockit Master Slate is a state of the art time code clapper
containing a software based timecode generator and reader. The generator is
driven by a very accurate crystal oscillator giving better than 1 ppm
accuracy.(one Frame a Day)
The slate is compatible with other clockit units such as the ACL Lockit video
camera synchroniser, ATM Clockit Timecode burst unit for audio recorders and
the Ambient Clockit controller and can be set by Aaton ASCII command or jam
synced to external timecode. Hand setting is easy and quick
The slate can be used as a stand alone unit where its accuracy will be better than
most of the units it is set by, or as part of a Clockit driven system where the
overall accuracy of all clockit units can be further tuned by the Clockit Controller
to give a system accuracy of better than 1 ppm.
The slate can function as a reader of external timecode and its display can be
retarded or advanced 7 Frames. The display has seven different brightness levels
which can be set by push button. The slate's internal generator can be jam synced
with ext timecode. set by ascii (Aaton Origen C) or set by hand. In the hand setting
mode the user bits can be changed as in changing camera roll number without
stopping the time. in other words once the time of day and date has been set it is
good for all day. When using the display intermittently as in normal clapping
mode the slate can run for several days on one set of batteries.
General features
*Small Rugged compact design running on 6 Mignon (Penlite) cells.
*DC/DC converter for long Battery life several days in Clapper mode.
*Microprocessor design gives minimal electronics and low power
*Variable Brightness Display. settable with external push buttons
*Clapper functions invertable showing time or user first
*Clapper fiunction without sticks using buttons,good for documentary
*Reads external time code to 1.5 times normal speed no frame delay.
*Time display shift settable + - 7 Frames
*Standard 5 pole Lemo input/output socket.
*Battery backup to allow battery change without losing time ( 5minutes)
*Led indicators to show state of battery and generator
*Slate extension for writing Take and Scene.
*A bigger slate for feature film use is being built.
*Charge internal batteries through Lemo input socket
Generator FEATURES
Fully clockit compatible
Very accurate tunable clock,
Better than Arri cameras less than one frame a day without tuning
Hand setting of time for use as Master Slate to set ARRI 535. Aaton etc
interstage
Phistersvej 31, 2900 Hellerup, Danmark
Telefon 3946 0000, fax 3946 0040
www.interstage.dk
- pro audio with a smile

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Clockit Master Slate ACD101 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ambient Recording Clockit Master Slate ACD101

  • Page 1 AMBIENT CLOCKIT MASTER SLATE ACD101 The ambient compact Clockit Master Slate is a state of the art time code clapper containing a software based timecode generator and reader. The generator is driven by a very accurate crystal oscillator giving better than 1 ppm accuracy.(one Frame a Day)
  • Page 2 User bits (CAM ROLL Nr) can be set without altering Time Generates all Framerates 24. 25. and 30. 29.97 in Drop, Nondrop modus Set time/ user with ext. timecode, Ascii. or by hand with push buttons Operation modi set by DIP swiches covered by battery slider Dip switch Framerates overridden by hand setting or ext Timecode 1.1 LED indicators RED LED blinks at one second intervals when the generator has not been set.On...
  • Page 3 Off no charge. 1.4 Brightness Setting The brightness of the display can be adjusted in 7 steps. One button is held down while the other is used to change the display brightness. Brightness levels 6 and 7 are only usable on intermittent display, Clapper mode. There is an internal command to lower brightness level if the display is left on permanently at the very bright level.As the batteries become empty it can occur that the display flickers.
  • Page 4 ENTER user only and retain running time by holding down both buttons 3 seconds or move cursor right to enter time domain. Set time in a similar manner to user and enter time by pressing the two buttons simultaneously. Displayed time is entered and also selected user bits.
  • Page 5 Nicads can be ticklecharged, really! through the external supply and the clapper can be run from an external supply of 9 to 16 volts. 1.11 Good shooting with the "Clockit Master Slate". Here are some typical filming situations which can be taken care of by the master slate.

Table of Contents