Related Manuals for anko LD-K1035
Summary of Contents for anko LD-K1035
- Page 1 Cordless Water Kettle LD-K1035 User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
- Page 2 -Knowing Your Product— -Technical Data-- Electrical Parameter： Model: LD-K1035 Voltage： 220-240V~ Frequency： 50/60Hz Wattage： 1850-2200W Rating Capacity： 1.7 L...
- Page 3 Unpacking CAUTION! DANGER to children- danger to life due to suffocation/swallowing. Keep all packing material and plastic bags out of reach of children. Dispose of it immediately. * Carefully remove all parts from the packaging and check that no parts are missing or damaged during shipping.
- Page 4 3. Press the lid front location down firmly to close it. Make sure that the lid is tightly closed during use. Otherwise the water kettle may not switch OFF after boiling 4. Fully unwind the power cord and run it through the cable guide channel on the base. 5.
- Page 5 --Important Safety Instructions-- Intended use * The kettle is intended solely for boiling water. Heating of milk, carbonated drinks or other liquids will cause malfunction or damage the appliance. * The appliance is intended for household use and is not suitable for commercial purposes. DANGER to children and infirm persons * This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or...
- Page 6 * Do not fill the container with less than (0.5L) or more than (1.7L) of water. If there is not enough water in the kettle, the appliance may overheat. If too much water is filled, the boiling water may splash out. * Be sure that the kettle is switched off before taking it off the power base.
- Page 7 12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.
Need help?
Do you have a question about the LD-K1035 and is the answer not in the manual?
Questions and answers
Kettle starts to boil then turns off
The anko kettle LD-K1035 starts to boil and then turns off automatically because it is designed to heat water to a selected temperature and then shut off. When the water reaches the set temperature, the LED light stops blinking and remains steady on. After five minutes, the LED indicator turns off. If the "keep warm" function is activated, the kettle maintains the selected temperature by switching on and off for 30 minutes.
This answer is automatically generated