Table of Contents
Advertisement
TV menu
Press the
key on the remote control to summon the main menu.
MENU
Note: Dependent on the input signal, one or more menu items may not be selectable.
Press the i key on the remote control to get information about the selected menu item.
Picture menu
Picture
TV
Smart picture
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic contrast
DNR
Colour enhancement
(Hue)
Picture format
Active Control
Smart picture
Select
Smart picture
predefined picture settings, each corresponding
with specific factory settings.
Personal
refers to the personal preference
settings of picture in the picture menu.
Note: This Philips Flat TV has been set at the factory
to look best in bright store environments which use
fluorescent lighting. As your home will likely not be
as well lit as a store, we recommend you that you
cycle through the various Smart picture modes to
find the one that best suits your own viewing
conditions. Most consumers will find that
the correct choice.
Digital options
Pixel Plus is the most ideal setting.
Dependent on your own preference, select
Standard.
Dynamic contrast
Sets the level at which the TV automatically
enhances the details in dark, middle and light
areas of the picture.
DNR
This sets the level at which noise is measured
and reduced in the picture.
Colour enhancement
This makes the colours more vivid and
improves the resolution of details in bright
colours.
Sound Features
&
Press the cursor right to select
é
Select the menu items in the Picture menu with the cursor
up/down.
"
Adjust the settings with the cursor left/right or enter the list of
submenu items with the cursor right. Select a submenu item
with the cursor up/down.
to display a list of
Natural
Hue
This compensates for the colour variations in
NTSC encoded transmissions.
Picture format
This will adjust the size of the picture
dependent on the broadcast format and your
preferred setting. See also Use of the remote
control, Picture format, p. 4.
Active Control
The TV continuously measures and corrects all
is
incoming signals in order to provide the best
picture possible.
&
Select
Active Control
é
Press the cursor right to enter the list of
Active control values.
"
Press the cursor right repeatedly to select the
Active Control values
or
Maximum
.
The picture settings are being optimised
continuously and automatically which is
displayed by bars.The menu items can not be
selected.
'
Press the
key or wait for the time out to
OK
dismiss the Active Control display.
.
Picture
.
,
,
Off
Minimum
Medium
11
Advertisement
Table of Contents
