Remote Control Keys - Philips Modea 26PF9320/10 User Manual

Remote control keys

Sound mode
Used to force programmes in
and to
Stereo Nicam Stereo
or, for bilingual programmes, to
choose between or
Dual I
The indication is red when in
Mono
forced position.
Select peripherals (p.11)
Press several times to select the
required EXT connector.
Screen Format (p. 7)
PIP (Picture in Picture)
on/off (p. 9)
Active control
Optimizes the picture quality depending
on the quality of the incoming signal
and the ambient light conditions.
These 4 keys are used to move
<>≤≥
around the menus (
To call up or exit the menus.
To mute or restore the sound.
Volume
To adjust the sound level.
Smart picture and sound
Used to access a series of predefined
picture and sound settings.
The position relates to
personal
settings selected from the menus.
Screen information
To display / remove the programme
number, the time, the sound mode
and the time remaining on the
timer. Hold down for 5 seconds to
permanently display the
programme number on the screen.
* Mode selector
Press the key to select the required mode :
Select
The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if
left idle.The remote control automatically returns to TV mode.
The following keys are operational, depending on the equipment :
. ê · ¢ ∫ Ê Æ ∆
I I
Mono
.
Dual II
Cursor
).
Menu
Mute
DVD
h <>≤≥
OK (cursor)
Standby
To set the TV to standby mode.
To switch the TV set on again,
press
Mode selector *
Pixel +
Switches the Pixel +
demonstration mode on or off.
PC / TV / Radio/HD
Press one of these keys to switch
the television between PC,TV,
radio or HD mode (p. 9).
Teletext (p. 8)
List of programmes
To display/clear the list of
programmes. Use the keys
select a programme and the key
to display it.
Selecting TV programmes
To move up or down a programme.
The number and the sound mode are
displayed for a few seconds.
For some TV programmes the title of
the programme appears at the
bottom of the screen.
Numerical keys
For direct access to programmes.
For a 2 digit programme number,
the 2
before the dash disappears.
Previous programme
To access the previously viewed
programme.
or .
AUX
ñ ô ∂
º
P - + /
ñ ô
.
/
, P - + or .
<>
to
≥
nd digit must be entered
3