Table of Contents
Advertisement
Tips
Symptoms
Poor Picture
No Picture
No photo, music
or video play or in
poor quality only
Digital distortion
No sound
Good sound but poor
colour or no picture
No solution found
for your picture or
sound problem ?
Remote control
Standby
No stable or not
synchronised VGA
picture
Control of
peripheral equipment
Motorised swivel
Miscellaneous
Kensington Security Slot (if present)
Your TV is equipped with a Kensington Security Slot, to prevent it from getting stolen. An anti-theft Kensington lock has to be
purchased separately.
The Kensington lock is a plastic-coated steel cable with a lock. One end has to be fixed to the opening of the TV and locked
with a special key.The other end is attached to a fixed point.
® Kensington and MicroSaver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications
in other countries throughout the world. All other registered and unregistered trademarks are the property of their respective owners.
36
Items to Check and Actions to follow
•
Have you selected the correct TV system in the manual installation menu?
•
Is your TV or house aerial located too close to loudspeakers, non-earthed audio equipment or neon
lights, etc.?
•
Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the aerial.
•
Is the picture or teletext unrecognisable? Check if you have entered the correct frequency.
See Installation, Manual installation, p. 8.
•
Are the supplied cables connected properly ? (The aerial cable to the TV, the other aerial to your
recorder, the power cables.)
•
Has the child lock been switched off ?
•
In case of weak or bad signal, consult your dealer.
•
Check if you selected the correct source.
•
Check if the source complies with a supported code.
•
The low quality of some digital picture material may be the cause of digital image distortion. In this case
select the Soft setting using the Picture menu, Smart Picture, without changing the picture settings
manually.
•
Select Digital STB in the Source menu (p. 13) to automatically switch to the Soft setting.
•
No sound on any channel? Check the volume isn't at minimum.
Is the sound interrupted with the mute key ¬?
•
•
Adjust the contrast, colour, tint and brightness setting.
Try another smart picture setting.
Switch your TV off and then on again once. Never attempt to repair a defective TV yourself.
Check with your dealer or call a TV technician.
• Check if the remote control is in the correct mode.
• If your TV no longer responds to the remote control, the batteries may be dead.
• You can still use the
MENU
Your TV consumes energy in the standby mode. Energy consumption contributes to air and water pollution.
Power consumption: < 1 W
• Check if you have selected the correct VGA mode in your PC.
• See HDMI connector, p. 28.
The infrared signals of the screen may influence the reception sensibility of other peripherals
Solution: replace the batteries of the remote control of other peripheral equipment.
E.g. keep away a wireless headphone from within a radius of 1 meter.
Objects between the remote control and the remote control swivel may prevent proper operation. See p. 3.
See Extras, Specifications on this CD.
key and the -/+ keys on top of your TV.
Hide quick links:
Advertisement
Table of Contents
