Philips Cineos 37PF9631D/10 User Manual page 56

2524.3._en.qxd 22-03-2007
EN
Symptom
The remote does
not function
The remote of
connected equip-
ment does not
function well
No photo or music
play or in poor
quality
No stable or not
synchronised VGA
picture
No solution found
for your picture or
sound problem
Red blinking led
Black bars with
HD channels
No EPG data
available
56
15:13 Pagina 56
Troubleshooting (Continued)
Possible cause/Remedy
<
Verify if the remote is set correctly for the equipment your are using.
<
Verify if the batteries are not dead. Replace the batteries.
You can still use the keys at the right side of the TV.
<
TV
Select mode on your remote control.
<
When pressing a key and some key leds are blinking with a higher speed and
lower intensity than in a normal working condition, and your TV does not react on
the key press, remove the batteries out of the remote control and put them back
again.
<
The infrared signals of the screen may influence the reception sensibility
of other peripherals.
Solution: replace the batteries of the remote of other peripheral
equipment.
<
Verify if the source complies with a supported code.
<
Verify if you have selected the correct VGA mode in your PC.
See Connect a PC, p. 50.
<
Verify the connections between the TV and the PC.
<
Switch off your TV off and then on again once.
Never attempt to repair a defective TV yourself.
Verify with your dealer or call a TV technician.
<
Unplug the mains cord for 10 seconds and insert it in again.
<
Select another picture format.
< The Electronic Programme Guide function and background programme
information are only made available by TV channels that provide EPG
information and in countries which support EPG.
See www.philips.com/support.