Remote Control Batteries; Antenna Cable; Connect The Mains; First Time Installation - Philips Cineos 32PFL9632D/10 User Manual

2702.1 en 20-09-2007
3.3

Remote control batteries

‡ Open the battery cover on the back of the
remote control.
® Insert the 2 batteries supplied (Type AA-R6-
1,5V). Make sure the + and - ends of the
batteries line up correctly (inside of case is
marked.)
Ò Close the cover.
rNote
Remove the batteries if you don't use the remote
control for a long time.
3.4

Antenna cable

‡ Locate the antenna connection at the back of
the TV.
® Insert the antenna cable tightly into the antenna
socket x Antenna.
Your TV
08:28 Pagina 7
ANTENNA
3.5 Connect the mains cord
‡ Verify that your mains voltage corresponds with
the voltage printed on the sticker at the back of
the TV. Do not insert the mains cord if the
voltage is different.
® Insert the mains cord tightly.
MAINS
The TV is never powered off completely unless the
mains cord is physically unplugged. Therefore the
mains plug must be accessible at all time.
3.6

First time installation

The first time, and only the first time, the mains
cord is inserted, the installation procedures starts
up automatically. Follow the instructions on screen.
Menu language
Please select your English
language... Español
Hrvatski
Italiano
using cursor up and
Magyar
down
...
Next
à Tips
• If you notice you have selected a wrong language,
press the red key on the remote control to
return to the language selection menu.
• To rearrange the stored channels, see section 6.3
Rearrange stored channels.
UK & Ireland
7