Advertisement
1
Remove electrical enclosure cover. Remove
knockout for AC line input wires.
Dimming line
3
Install listed electrical fittings in the knockout holes
for wire protection. Connect the dimming control
(grey and purple or purple and purple/white) wires
of the LED driver using 18-14AWG twist-on wire
connectors.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class [A] RFLD complies with the
Canadian standard ICES-003. Ce DEFR de la classe [ A ] est conforme à la NMB-003 du Canada.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to
change without notice. All values are design or typical values when measured under laboratory conditions. GE Lighting is a business of the General Electric Company. © 2016 GE.
IND299 (Rev 10/19/16)
AC line
2
Install listed electrical fittings in the knockout
holes for wire protection. Connect the AC line
to the luminaire internal wires according to the
wiring diagrams using 18-14AWG twist-on wire
connectors.
4
Replace electrical enclosure cover and secure
it with the screw.
Advertisement
