Advertisement
Fingerprint Padlock Institutions
Operation guide:
1. The first and second user will be default as admin user, other users
need admin user's authentication.
2. Any fingerprint could unlock when the fingerprint storage is empty,
and it cannot be unlocked by illegal user when fingerprint user is set.
Add admin user:
1. Press the button for 2s
2. The led will be blue and turn to flash in green
3. Then press fingerprint successfully for 10 times, the led will be blue if
succeed, will be red if not succeed.
4. The registration is finished if the led turns green.
Add common user:
Material: Zinc alloy
Size: 62*28*15mm
Battery: 160mAh
Charging port: 5V, 0.5A(Micro USB)
Advertisement
Table of Contents
Summary of Contents for Wizard-tk ON-FBZT10
- Page 1 Fingerprint Padlock Institutions Material: Zinc alloy Size: 62*28*15mm Battery: 160mAh Charging port: 5V, 0.5A(Micro USB) Operation guide: 1. The first and second user will be default as admin user, other users need admin user’s authentication. 2. Any fingerprint could unlock when the fingerprint storage is empty, and it cannot be unlocked by illegal user when fingerprint user is set.
- Page 2 1. Press the button for 2s 2. Press admin fingerprint after the led keeps blue 3. The led revert from blue to flashed green 4. Then press fingerprint successfully for 10 times, the led will be blue if succeed, will be red if not succeed. 5.
Need help?
Do you have a question about the ON-FBZT10 and is the answer not in the manual?
Questions and answers