Viavi Observer Gigastor GS-8P-384T Hardware Installation
Viavi Observer Gigastor GS-8P-384T Hardware Installation

Viavi Observer Gigastor GS-8P-384T Hardware Installation

Advertisement

Quick Links

GS-8P-384T
Hardware Installation
21 Jan 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Observer Gigastor GS-8P-384T and is the answer not in the manual?

Questions and answers

Summary of Contents for Viavi Observer Gigastor GS-8P-384T

  • Page 1 GS-8P-384T Hardware Installation 21 Jan 2020...
  • Page 2 1.  If applicable, mounted weight includes any rail kits. 2.  SFP may be any of Copper 10/100/1000, 1Gb SX/LX. SFP+ may be any of 10Gb SR/LR. QSPF+ may be any 40Gb SR/LR/BiDi/Universal. 2 — © 2020 Viavi Solutions (21 Jan 2020)
  • Page 3 Quick start for experienced installers First time installers should use the information on the next page. 3 — Quick start for experienced installers...
  • Page 4 13. If you are connecting to a network TAP (sold separately): this GigaStor probe to Observer to capture network traffic with a probe instance. 1. SFP, SFP+, QSFP+, and QSFP28 transceivers are sold separately. 4 — © 2020 Viavi Solutions (21 Jan 2020)
  • Page 5 Installing the drives in your Observer Platform appliance the same approximate depth. Check any that are protruding Failure to install the drives in the proper location will result in while the system is turned off. poor read and write performance until the RAID array volume is Turn on the system, and check that every activity LED light rebuilt.
  • Page 6 You interact with the hardware appliance through the Apex UI. Navigate to https://hostname where hostname is the IP address or DNS name for the appliance. Log into the interface using the username admin and default password admin. 6 — © 2020 Viavi Solutions (21 Jan 2020)
  • Page 7 Configuring the LOM or IPMI port Your appliance comes with an on-board LOM or IPMI port that provides you a dedicated management channel for device maintenance. It allows you to monitor, start, stop, and manage your appliance remotely regardless of whether the appliance is powered on.
  • Page 8 If Windows starts without error and you can log in, you ● are done. ● If there are still errors, then it is likely that the operating system drive is corrupted. Continue. 8 — © 2020 Viavi Solutions (21 Jan 2020)

Table of Contents