Removing A Memory Module - Toshiba L450 User Manual

L450/L450D
5. Seat the memory module cover in place and secure it with one screw.
Take care to ensure that the memory module cover is firmly closed.
6. Install the battery pack - refer to
Chapter 6,
7. Turn your computer over.
8. Turn the computer on and make sure the added memory is recognized -
to confirmed it, Start -> Control Panel -> System and Security ->
System icon.

Removing a memory module

To remove the memory module, follow the steps as detailed below:
1. Set the computer to Boot Mode and turn its power off - make sure the
Power indicator is off (refer to the
Chapter 3,
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Turn the computer upside down and remove the battery pack (refer to
Replacing the battery pack
Modes, if required).
4. Push the latches away from the module in order to release it.
8-6
Figure 8-3 Seating the memory module cover
Power and Power-up
Getting Started, if required).
section in Chapter 6,
Replacing the battery pack
Modes, if required.
Turning on the power
Power and Power-up
section in
section in
User's Manual