Advertisement
Advertisement
Table of Contents
Related Manuals for ZURN ZGW-LORA-W1
Summary of Contents for ZURN ZGW-LORA-W1
- Page 1 ZGW-LORA-W1 Zurn Gateway Connected Products Gateway Installation Guide...
-
Page 2: Package Contents
– Power supply – RJ45 Ethernet cable – Mounting plate – Installation Guide Important: Contact Zurn if a replacement power supply is needed. Using a different power supply may damage the device and voids the warranty. Connectors and LEDs Note: Some features are available only on select models. - Page 3 If not lit, the Ethernet is linked at 10 Mbps. LTE Cellular Connection If your gateway is configured for LTE cellular capability (Model ZGW-LORA-W1-LTE), it will have shipped to you with an active SIM card already installed. Note: The ZGW-LORA-W1-LTE works only on the AT&T network, and connects automatically once the gateway is powered and in range of the AT&T network signal.
- Page 4 4. Zurn Gateways have been set to DHCP by default. Please consult local IT support for possible additional access requirements for your network. Mounting the Zurn Gateway The device ships with a mounting bracket. You will also need: • Four #6 screws with anchors • Screwdriver • Drill...
Need help?
Do you have a question about the ZGW-LORA-W1 and is the answer not in the manual?
Questions and answers