Advertisement
Quick Links
Cod.970087I V12_19
MEET PC DESKTOP Proximity Reader User Manual
MEET PC DESKTOP Proximity Reader allows MEET Management Software to read
cards in order to assign them to users during the configuration process.
Refer to MEET Management Software Manual for further details about user
management.
Advertisement
Summary of Contents for Fermax MEET PC DESKTOP
- Page 1 Cod.970087I V12_19 MEET PC DESKTOP Proximity Reader User Manual MEET PC DESKTOP Proximity Reader allows MEET Management Software to read cards in order to assign them to users during the configuration process. Refer to MEET Management Software Manual for further details about user...
- Page 2 Operation 1. PC connection Use the included USB cable to connect the MEET PC DESKTOP Proximity Reader to a PC. You will hear a beep confirmation tone. 2. Select MEET protocol. MEET PC DESKTOP Proximity Reader can work with different protocols, so that, it is necessary to set it into the MEET protocol in order to allow communication with the PC.
- Page 3 3. Driver installation Download the latest Silicon Labs CP210ISB to UART Bridge driver from https://www.fermax.com/spain/pro/soporte-online.html clicking on MEET-Drivers- Ref 9538. Install it and take note of the assigned COM port. In the case of the next example is the COM7.
- Page 4 6. Select correct baud settings MEET PC Desktop Proximity Reader can work with two different baud rates, 9600 and 19200 bps. It is possible to change the baud rate by doing one long press (more than 6 seconds) to its PROGRAMMING BUTTON.