Huawei P20 lite User Manual page 45

Hide thumbs Also See for P20 lite:

Table of Contents

Use NFC to send data: Open

Huawei Beam. Select the files to be sent and touch Share > Huawei Beam. Keep your Phone

unlocked and the screen on. Place the NFC detection areas of both devices close together. Once a

connection is established, the transmitting device will play an audio prompt and the sharing screen

will minimise. Touch the transmitting device's screen to begin sending files.

Receive files over NFC: Open

Huawei Beam. Keep your Phone unlocked and the screen on. Place the NFC detection areas of both

devices close together. Once a connection is established, the transmitting device will play an audio

prompt. After the prompt, please wait for the file transfer to complete. Received files are saved by

default to the Beam folder of your Files.

If there is an option to enable Read and write/P2P on the NFC screen, ensure that it is enabled.

Features may vary depending on your network provider.

Use NFC to Quickly Establish Connections between Devices

Place the NFC detection areas of your two devices close together to quickly establish a Bluetooth or

Wi-Fi connection between them. You can also use this method to establish a Wi-Fi Direct connection

or to share a Wi-Fi hotspot without the trouble of searching for devices, pairing, and manually

entering connection details.

Settings, then touch Device connectivity and enable NFC and

Device Connection

Table of Contents