Efco Oleo-Mac PWX 200C Operators Instruction Book page 16

AGIP MULTITECH 15W/30 corresponding oils:
U.T.T.O.
(Universal Tractor Trasmission Oil)
Massey-Ferguson M-1135
Mobil Mobilfluid 422
WARNING
• As far as engine lubricants are concerned, refer to the relative operating and maintenance manuals.
Refer to figures 1 to 3:
1 - Pump
2 - Petrol/gasoline engines
3 - Frame
4 - Handle
5 - Handle securing screws
6 - Handle securing washers
7 - Handle securing nuts
8 - Warning plate
9 - Accessory rack
10 - Detergent suction filter
11 - Water inlet hose-end fitting
12 - Water inlet hose clamp
13 - ID plate
14 - Base
15 - Water outlet fitting
16 - Water inlet fitting
• Pressure unloader/regulation valve
Valve, suitably calibrated by the Manufacturer, for regulating work pressure by means of a knob (17)
and that allows the pumped fluid to return to pump suction thus preventing the onset of dangerous
pressures when closing the spray gun or when trying to set a pressure that is above the maximum
permitted values.
• Spray gun lever lock device.
Safety stop (32) for locking the spray gun (19) lever (28) in the closed position so it cannot be started
accidentally (Fig. 2, position S).
Make sure the following are inside the pack of the product you have purchased:
• high pressure cleaner;
• handle;
• high pressure delivery hose;
• spray gun;
16
API GL-4
Ford M2C - 86 B
Ford M2C - 134 B/C
IDENTIFICATION OF COMPONENTS
SAFETY DEVICES
STANDARD FITTING
17 - Pressure regulating knob
18 - Pressure indicator
19 - Spray gun
20 - High pressure hose quickfit coupling
21 - Single barrel lance hose
22 - Water inlet filter
23 - Detergent suction fitting
24 - Single barrel nozzle holder head
25 - Detergent suction hose clamp
26 - Pump oil level indicator
27 - Oil plug with vent for pump
28 - Spray gun lever
29 - Nozzle cleaning needle
30 - High pressure hose
31 - Detergent suction hose
32 - Spray gun lever safety stop
John Deere J20A
Esso Torque Fluid 62
Shell Donax TD