Page 1
Houdini Harness Model 28 Installation and User Manual MODEL “B” - Standard Buckle #4604-2803-017 MODEL “SB” - Anti-Escape Buckle #4604-1303-017 PEN/KEY RELEASE UPGRADE #4604-2805-031 CUSTOM: ______________________________ IMPORTANT CONSUMER INFORMATION NOTICE: This manual contains important instructions that Instruction Video must be passed on to the user of this product. Please do not remove this manual before delivery to the end user.
Page 2
MODEL 28 Designed to offer postural support and a certain degree of restraint to children and adults to keep them in an upright sitting position. Fits most types of vehicle seating including single and double seats. To fit the harness access is required between the seat back and seat cushion. It is not a safety harness &...
Page 3
MODEL 28 FITTING INSTRUCTIONS Place the PVC backing of the harness against the front of the seat back. Pass the two top vertical fixing straps up and over the seat back. Pass the tail-ends of the vertical fixing down through the gap between the seat back and seat cushion and bring them up to connect through the Aluminium Bar Buckles of the top fixing straps....
Need help?
Do you have a question about the Houdini 28 Series and is the answer not in the manual?
Questions and answers