Using The Pop Double-Window Feature - Toshiba 62HM14 Owner's Manual

Using the POP double-window feature

The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time. The
POP program can come from a TV broadcast or an external source,
such as a VCR.
To display a TV broadcast in the POP window:
1. Press SPLIT to display the POP window.
Main window
(480i only)
2. Select POP channels in the following two ways:
• To change to a specific channel, press POP DIRECT CH.
While "POP" is on the screen, press the Channel Number
buttons (0–9 and 100).
• To change to the next programmed channel, press POP CH
zy.
If the V-CHIP feature is active and you try to watch a TV
program that exceeds your set rating limits, the program will be
blocked (see "Using the V-CHIP menu" on page 37).
To display a picture from an external source in the POP window:
1. Connect the external source equipment (see "Connecting your
TV" on page 8).
2. Select the TV program you want to watch in the main window.
3. Press SPLIT to display the POP window.
4. Repeatedly press SOURCE to select the input source for the POP
window (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1,
ColorStream HD2, or HDMI). The current source will display in
purple.
POP SOURCE SELECT I ON
0 : TV
1 :
2 :
3 :
4 : Color Stream HD1
5 : Color Stream HD2
6 : HDM I
0 - 6 : TO SELECT
While the above menu is on the screen, you can select the desired
signal input source by pressing the corresponding number button
(0–6).
To close the POP window:
Press SPLIT again or EXIT.
62HM14(E)26-37 33
ANT 1
MAIN POP
6 12
POP
24
BLOCKED
V I DEO 1
V I DEO 2
V I DEO 3
Note:
• The SPLIT buttons on the remote control
operate the TV's POP features.
• You can display only 480i format program
in the main window. Only the audio signal is
output.
• You cannot display the ANT-2 signal source
in the POP window.
• You can choose to output the sound of
either the main or POP program through
the AUDIO OUT jacks (see "Selecting the
POP window
Audio OUT sound" on page 54).
• You can choose to hear either the main or
POP audio through the TV speakers. (See
"Switching the speaker audio (main or
POP)" on page 34.)
• HDMI, 720p ColorStream, 480p
ColorStream, and 1080i ColorStream
signals will only display in the POP (right)
window. These signals will not display in the
main (left) window when the TV is in
double-window mode.
• If an HDMI or ColorStream source is being
viewed when you open the POP double-
window feature, the HDMI or ColorStream
source will default to the POP (right)
window.
POWER
TV / VIDEO RECALL
INFO
1 2 3
4 5 6
7 8 9
+10 CHRTN
100 0
ENT
FAV
MENU
DVDMENU
FAV
TV
CBL/SAT CH VOL
VCR
DVD
POP DIRECT CH MUTE
TV/VCR PAUSE STOP
FREEZE SOURCE
REW FF SKIP / SEARCH
CH SCAN SWAP POP CH
REC
1/24/05, 1:48 PM
Channel
Number
EXIT
POP DIRECT CH
SLEEP
SPLIT
PLAY
SOURCE
SPLIT
POP CH zy
LIGHT
33