Related Manuals for Campini Corel ATB100
Summary of Contents for Campini Corel ATB100
- Page 1 USER MANUAL WI-FI THERMOSTAT ATB100 REV 1.5 ENGLISH Termoregolatori Campini - Corel SpA Via Don Guanella 1, 22066 Mariano Comense (CO) ITALY...
-
Page 2: Table Of Contents
MANUAL USER WI-FI THERMOSTAT ATB100 Index Warning ................................2 Product description ............................2 Shipping contents ............................2 Compatibility ..............................3 Supported installations ..........................3 Campini Thermostat............................4 Campini Router ..............................6 App ..................................6 Inserting / replacing batteries ........................7 Configuration ..............................8 Campini thermostat does not communicate correctly ................10 Router Campini does not communicate correctly ................. -
Page 3: Warning
If your house has a multi-zone system, you can install more Campini Thermostats, up to a maximum of 8, and associate them with the same Campini Router. Through the Campini Corel Thermostat application, it is possible to associate several Campini Routers to the same account. Consequently it is possible to control multiple systems with the same user. -
Page 4: Compatibility
In a single zone installation, the Campini Thermostat directly controls the system via the control cables. It communicates via radio with the Campini Router which is connected via a WI-FI network to the internet thus allowing remote control thanks to the Campini Corel Thermostat application. -
Page 5: Campini Thermostat
MANUAL USER WI-FI THERMOSTAT ATB100 Campini Thermostat With this display you can view some of the key information on the status of the Campini Thermostat operation: • Detected temperature and setpoint temperature, respectively on the left and right of the display. - Page 6 MANUAL USER WI-FI THERMOSTAT ATB100 • If the Campini Thermostat is in manual mode, the display shows the icon • If the Campini Thermostat is in Away mode, the display shows the icon • If the Campini Thermostat is in antifreeze mode, the display shows the icon The Campini Thermostat has two buttons to perform the following actions: •...
-
Page 7: Campini Router
Campini Thermostat. The application is available free on Play Store (Android 4.2 and higher) and App Store (iOS 9 and later). For more information visit the website atb100.campinicorel.it. Page 6... -
Page 8: Inserting / Replacing Batteries
MANUAL USER WI-FI THERMOSTAT ATB100 Inserting / replacing batteries The replacement of the Campini Thermostat batteries must be performed when the icon appears on the display and on the application. The user will also be notified with push notifications and, if enabled, notifications via email. -
Page 9: Configuration
4) Ensure that your mobile device is connected to the WIFI network that you want to set in the Campini Router. 5) Log in to the Campini Corel Thermostat application. 6) Press "COMBINE A CAMPINI ROUTER" or, alternatively, go to the page "Accommodations"... - Page 10 Campini Router closer to the Campini Thermostat and repeat point 15 Press the icon on the Campini Corel Thermostat application to display, in the list proposed, the new Campini Thermostat associated. If the application does not show the newly paired device, press the icon again until it appears.
-
Page 11: Campini Thermostat Does Not Communicate Correctly
In this case it is necessary to bring the Campini Router closer to the Campini Thermostat. 3) The Campini Thermostat has been eliminated using the Campini Corel Thermostat application. 4) The Campini Router is turned off. -
Page 12: Router Campini Does Not Communicate Correctly
If a WIFI network is not available, the Campini Thermostat and the Campini Router will continue to operate according to the last parameters set via the Campini Corel Thermostat application. • A rapid flashing of the blue light followed by a pause of about 4 seconds indicates the correct connection with the WIFI network, therefore the Campini Router is working correctly. -
Page 13: Operating Mode
MANUAL USER WI-FI THERMOSTAT ATB100 Operating mode through the application (App) The desired temperature (set point) can be set using one of the following modes: • Automatic: the setpoint is automatically changed according to the weekly program set by the application. -
Page 14: Heating Prediction
MANUAL USER WI-FI THERMOSTAT ATB100 Heating prediction According to the weather conditions and the characteristics of the house, the Campini Thermostat is able to turn on the heating in advance to reach the desired temperature at the programmed time. Alternatively, you can use the parameter "Minutes in advance for each °... -
Page 15: Support
MANUAL USER WI-FI THERMOSTAT ATB100 Support If necessary, you can consult the Internet address atb100.campinicorel.it. If you cannot find a solution to your problem, you can contact the technical assistance by writing an email to the email address support@campinicorel.it. Technical specifications CAMPINI THERMOSTAT •... -
Page 16: Declaration Conformity Ue
MANUAL USER WI-FI THERMOSTAT ATB100 Declaration conformity UE The manufacturer, Termoregolatori Campini-Corel Spa, declares that the ATB100 radio equipment device complies with the 2014/53/EU Directive. The complete text of the Eu declaration of conformity is available at the following Internet address: atb100.campinicorel.it/UE.pdf.
Need help?
Do you have a question about the ATB100 and is the answer not in the manual?
Questions and answers