Picture Controls - Picture Position (Analogue Only), Back Light - Toshiba Regza 47WLT66 Owner's Manual

Most of the picture controls and functions are available in both digital and analogue modes. To access the
the required menus when in digital mode: press MENU and using Q select TV setup, press OK then S or R
to select the desired menu. PLEASE NOTE: features not available in digital mode will be greyed out. To access
the required menus when in analogue mode: press MENU and use S or R to select the desired menu.
Picture position – analogue only
The picture position may be adjusted to suit personal
preference and can be particularly useful for
external inputs.
In the SET UP menu press Q until
1
Picture position is highlighted.
Picture position
Quick Setup
MENU Back EXIT
Press OK to view the options available for the
2
picture format that has been selected.
Press P and Q to select an option, then S or R
3
to adjust the settings.
The options alter depending on the widescreen
format chosen and when viewing connected
equipment.
In Cinema 2:
Picture position
Horizontal position
Vertical position
Reset
MENU Back EXIT
To return to the original factory settings select Reset
in the Picture position menu and press OK.
Picture controls
SET UP 2/2
OK
OK
Watch TV
0
0
OK
Watch TV
Adjusting the Back light can improve the clarity of the
In the PICTURE menu press Q to select
1
Picture settings, then press OK.
Picture settings
3D Colour management
Base colour adjustment
Cinema mode
Back
MENU
In the Picture settings menu press Q to select
2
Back light.
Press S or R to adjust.
3
Back light
Contrast
Brightness
Colour
Tint
Sharpness
Back
MENU
20
Back light
screen when viewing.
PICTURE
Watch TV
EXIT
Picture settings
Watch TV
EXIT
OK
Off
Off
1/2
100
100
50
50
0
0