4Gamers SPC9812 Manual page 3

OPTION 2 – TV HEADPHONE CONNECTOR
1. Connect the 3.5mm Audio Cable into the "Audio In" on the
Interactive Gaming Chairs control panel
2. Connect the other end of the 3.5mm Audio Cable into the
headphone connection on your TV
If you experience any distortion on the Interactive Gaming
Chair speakers turn your TV volume to a lower setting.
If the Interactive Gaming Chair speakers are very quiet then
turn your TV volume to a higher setting.
OPTION 3 – TV AUDIO OUTPUT
1. Connect the 3.5mm Audio Cable into the "Audio In" on the
Interactive Gaming Chairs control panel
2. Connect the Phono Pass Through Connection onto the
other end of the Audio Cable
3. Plug the Phono Pass Through Connection into an audio
output connection on the rear of your TV
PS3™ SYSTEM AUDIO SET-UP
So that you can hear the game audio through the Interactive
Gaming Chair, you must make sure that your PS3™ system
is set-up as follows:
1. Turn on your PS3™ system, go to
SETTINGS > AUDIO MULTI OUT and set this to ON
2. Press "X" to save this setting.
USB Charging Ports
- -
+ +
DC Input Audio In Headphones Vibration OFF ON
Bass
Volume
TV
3
2
HDMI CABLE
1
> SOUND
TURNING ON THE INTERACTIVE GAMING CHAIR
1. Turn the On/Off Volume Control on until it clicks and the
chair will turn on
2. Adjust the volume and bass controls to a suitable
listening level
QUAD VIBRATION FUNCTION
The Interactive Gaming Chair has a built in Quad Vibration
feature which allows you to feel every crash, shot and
explosion in the game, the vibration is activated from the
games sound and should be set-up as follows:
1. Turn the vibration to its minimum position
2. Start your game and play as normal
3. While playing slowly turn the vibration up until you feel
the Interactive Gaming Chair start to vibrate
4. Once the chair is vibrating turn the vibration back down
slightly until it just stops
5. The gaming chair should now vibrate whenever there is a
loud noise within the game
If you don't experience any vibration or you require more
vibration simply turn the vibration control up slightly.
USB CHARGING CONNECTIONS
The Interactive Gaming Chair has 2 x built in USB
connections that are used for charging either
DUALSHOCK®3 or PlayStation
HEADPHONE CONNECTION
The Interactive Gaming Chair has a standard 3.5mm
headphone connection to allow you to listen to your game
in privacy while still using the chair. By connecting a set of
standard audio headphones the chairs built in speakers will
be disabled, however the Quad Vibration feature will still
work as normal.
PlayStation Vita AND PSP™ SYSTEM CONNECTION
®
The gaming Chair also allows you to connect your PS Vita™
or PSP™ system for superior sound and vibration effect
while playing.
1. Connect the 3.5mm Audio Cable into the "Audio In" on the
Interactive Gaming Chairs control panel
2. Connect the other end of the 3.5mm Audio Cable into the
headphone connection on your PS Vita™ or PSP™ system
If you experience any distortion on the Interactive Gaming
Chair speakers set the volume to a lower setting on your
PS Vita™ or PSP™ system, if the Interactive Gaming Chair
speakers are very quiet then increase the volume to a
higher setting.
FREQUENTLY ASKED QUESTIONS
Q: The USB connections wont charge my controllers?
A: Ensure that the Interactive Gaming Chair is turned ON
Q: I cannot sync my controllers using the USB
connections?
A: The USB connections are for charging only and not able
to transfer data
Q: My gaming headset will not work with the Interactive
Gaming Chair?
A: The Headphone connector is only for use with standard
audio headphones
Move controllers only.
®