Summary of Contents for facelift spider ts26
- Page 1 0800 52 15 95 www.facelift.co.uk spider ts26 shortform operating instructions narrow access...
- Page 2 • Take unnecessary risks (hospitals and graveyards are • MAKE SAFETY YOUR No.1 PRIORITY. full of dead heroes!) In the unlikely event that your machine develops a fault please contact the Facelift Tech Team on 01444 881100 CONTENTS Summary of Warnings ..........1 Operating Instructions ..........4 Hydraulic Equipment ..........3...
-
Page 3: Summary Of Warnings
1 SUMMARY OF WARNINGS This list summarises critical WARNINGS in this manual. They are repeated here to let you know how important they are. Study these WARNINGS carefiully; they can save your life and the lives of people with whom you work. WHEN THE SPIDER IS USED FOR WELDING WORK THE SPIDER HAS TO BE UNPLUGGED AND THE OUTRIGGERS HAVE TO BE PLACED ON RUBBER MATS. - Page 4 CALL AUTHORISED SERVICE CENTRE IMMEDIATELY. IF THE HINGED JOINT OF THE OUTRIGGER IS LOCKED IN THE TRANSPORT POSITION AND NOT IN THE BEFORE ENTERING THE BASKET, IT MUST BE STANDARD POSITION OR A MORE STRETCHED CONTROLLED THAT THE BASKET IS PROPERLY LOCKED POSITION, THE STABILITYSYSTEM CANNOT WORK, TO THE BASKET SUSPENSION.
-
Page 5: Hydraulic Equipment
2.4 BASKET LEVELLING Basket is levelled by a closed hydraulic circuit via a double chain system. One chain is carrying the load and another chain is provided in case of emergency. REAR AXLES NOT LOCKED WITH THE LOCKING PIN, CAN MAKE THE REAR AXLE FALL OUT AND THE PLATFORM TURN OVER, CAUSING SERIOUS INJURY OR DEATH. -
Page 6: Operating Instructions
2.9 BASKET-LOCK. If the basket suddenly starts to turn over, the basket automatically will be locked, and the main boom can not be activated. The platform can now be brought to the ground. WHEN OPERATING THE SPIDER IN RAISED POSITION (OUTRIGGERS FULLY EXTENDED) THE OUTRIGGERS MUST BE PLACED IN STANDARD POSITION, SEE FIG. - Page 7 THE HINGED JOINT OF THE OUTRIGGERS MUST ALWAYS BE LOCKED IN THE STANDARD POSITION OR A MORE STRETCHED POSITION. WHEN POSITIONING THE OUTRIGGERS ON THE GROUND IT IS IMPORTANT TO ENSURE THAT ALL HANDS, FEET AND ANY OTHER BODY PARTS ARE KEPT CLEAR OF THE OUTRIGGERS, FOOTPLATE AND ANY OTHER MOVING PARTS.
- Page 8 DO NOT TELESCOPE WITH THE JIB IN ITS SEAT, THIS WILL BEFORE ENTERING THE BASKET, IT MUST BE CAUSE DAMAGE TO THE PAINT ON THE MAIN BOOM. CONTROLLED THAT THE BASKET IS PROPERLY LOCKED TO THE BASKET SUSPENSION. DO NOT ATTEMPT TO USE Mounting of basket.
- Page 9 DO NOT OVERLOAD THE BASKET, OR ATTEMPT TO USE THE BASKET OR THE PLATFORM AS A CRANE. The emergency stop button cuts off the main power and prohibits all movement. If the red stability lamp on the basket control box and on one, or more of the outriggers is on, and the boom WHEN OPERATION THE PLATFORM ENGAGING ON THE functions stop, the main reason is that the limit for sufficient...
- Page 10 10. Manuel emergency lowering. Lift the outriggers off the ground and loosen the hinged joints. If the hydraulic pump is not working the platform can be brought Lift the outriggers all the way up to stowed position and to the ground via the manual handpump system, by following lock the toggle joints.
-
Page 11: Notes
A separate 2 way switch for connecting 3 wheel drive is situated NOTES on the battery charger box. When switched in the on position, the 3 wheel drive is activated, when the handle switch is activated in the first steep (slow speed). Handle switch second step gives only drive on front wheel. - Page 12 When hiring access equipment we strongly recommend taking advantage of one of our one day operator training courses As Facelift is an accredited IPAF (Independent Powered Access Federation) training centre you can be sure that your staff will be trained to...