Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Stage4 BURAN 1300
Summary of Contents for Stage4 BURAN 1300
- Page 1 ENGLISH BURAN 1300 Version 1.0...
-
Page 2: Table Of Contents
CONTENTS Warning Caution Particular Warning! Please note Important Figure1 BURAN 1300 Functions Description Getting ready Mounting Set Up DMX Connector Pin Assignment Functions of the buttons Operation Figure 2 DMX Chart Troubleshooting Maintenance Product Specification Appendix- A VT-1 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. -
Page 3: Warning
Thank you for selecting our BURAN 1300 , you already own the high-tech, professional DMX snow machine! Better read the manual thoroughly before operation, follow instruction will help you have a smooth handling with BURAN 1300 to achieve the most satisfactory snow effect, it will also assist unit to further prolong life time as a whole. - Page 4 • Without user-serviceable parts in the package, please contact your local agent or qualified technician for servicing. • Without changeable structure by non-qualified user, please do not open the cover or have any change at will, otherwise, it may cause accident! • Snow machine is for adult use. Keep out of reach of children. Never leave the unit running unattended. • Keep case closed while operating. Put snow machine in drafty place, do not insert objects into air vents. Allow 20cm space or above around the machine for proper ventilation.
-
Page 5: Caution
• Never drink snow fluid. If ingested, call a doctor immediately. If fluid contacts eyes or skin, rinse skin thoroughly with water. • Read user manual instructions thoroughly before operating. Follow the instruction. Never remove warning or informative labels from the unit. Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact your local dealer. Particular Warning : When the snow machine is idle and does not work, it is recommended to empty the tank and make a cleaning procedures: put the water into the tank, in accordance with spray snow operation to clean the interior of the snow machine until the water is almost no foam so far. -
Page 6: Please Note
Please note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. Important The wires in this mains lead are colored in accordance with the following code. Green and Yellow – Earthed (E) Blue – Neutral (N) Brown – Live (L) Warning: This appliance must be earthed. Green and Yellow – Earthed (E) White – Neutral (N) Black – Live (L) Warning: This appliance must be earthed. - Page 7 Figure1 BURAN 1300 Functions O P Q R S T U A. Hanging Bracket with handle L. Timer ON/OFF LED Indicator M. Timer ON/OFF screw (could be done as a tripod) B. Unique Anti-Spill Tank N. Control Socket Connection C. Quick Connector O. DMX 3 PIN XLR Output D. Inlet with Magnetic air filter P. DMX 3 PIN XLR Input E. Snow Nozzle with cloth Q. DMX 5 PIN XLR Output F. LCD display R. DMX 5 PIN XLR Input G. MENU S.
-
Page 8: Description
Description • Realistic snow function, under this function the snow volume verifies in random, and the snowing effect looks like real and very natural. • Unique design of 5.6 liter liquid tank let BURAN 1300 have no worry of liquid leaking when being operated up spray or side spray. Quick connector makes replacement direct and easier when performance is ongoing. • Built-in automatic detection of liquid, if the liquid is too low, the LCD display will show a warning prompt; and the machine will stop working. • When up spray, the hanging bracket could be done as a tripod, and be adjusted elevation angle from 50 to 70 degree to do special parabolic snow output, the snow output looks more natural and beautiful. • Powerful and stable snow output control from 0-100%. Could flexible with the speed of the fan. Suitable for operation in any locations. • 50% and 100% air volume adjustment. Quiet and smooth air volume adjustment let the spread of snow softer. 100% high fan speed let the snow be even and expand more quickly throughout... -
Page 9: Getting Ready
All products are thoroughly tested at the factory and shipped in perfect condition. If damage has occurred during shipping, or if components are missing, please contact your local dealer immediately. Your package should include: 1. One BURAN 1300 Snow Machine 2. One powerCON cable 3. One product user manual Mounting BURAN 1300 is shipped complete, ready to use. The bracket is... -
Page 10: Set Up
Set Up 1. Open the shipping carton and carefully remove the snow machine unit from the shipping carton. 2. Be sure to remove packing material from around the snow machine, especially near the snow outlet. 3. Set the snow machine on a dry, flat surface. 4. Fill the snow liquid to the tank. Place the feeder tube with filter deep inside the full fluid tank (Figure1-B). Please use dealer recommended high quality snow liquid only. 5. Connect the quick connector with the liquid tank cap (Figure 1-C). Be sure of well connection. 6. Plug mains power cord from the snow machine into appropriate power supply socket. 7. Use LCD display & Function buttons for operating control, or connect DMX controller for setting. 8. Or firmly attach the remote control mechanism to socket (Figure1-N) on the back of the unit for simple operating. -
Page 11: Dmx Connector Pin Assignment
DMX Connector Pin Assignment The machine provides a 3- or 5-pin XLR connector for DMX connection. The diagram below indicates pin assignment information. 5 pin XLR 3 pin XLR 1. Ground 2. Cold 1. Ground 5. N/A 2. Cold 4. N/A 3. Hot 3. Hot 2. Cold 1. Ground 5. N/A 1. Ground 4. N/A 2. Cold 3. -
Page 12: Functions Of The Buttons
Functions of the buttons 1. MENU: Function switching button; then have the numerical value changed by using UP( ) and DOWN( ) buttons. A. DMX Mode: DMX mode selection. Single channel, 3 channels and 5 channels mode can be selected. B. DMX Set: Setting of DMX address.Range of address value: address=001~512. Press UP/Down 1.5 seconds can change value continuously and fast, pressed UP/DOWN at the same time, value back to 1. - Page 13 D. WIND H/F/A: Setting of Air volume, there are three changes; Half =50%, Full=100%, and Auto. Auto is random effect, interchange of 50% and 100% of air volume every 2-5 minutes. E. Duration: Setting duration of timing spraying snow (Duration=10~200s). F. Interval: Setting interval of timing spraying snow (Interval=20~2000s). G.FLUID SCAN ON/OFF: Setting of automatic inspection of fluid. 1. When this function is OFF, the machine cannot inspect volume of the fluid. This means that the machine will keep working even there’s no fluid. 2. When this function is ON, the machine starts this inspection function automatically.
- Page 14 : Button for increasing numerical value. : Button for decreasing numerical value. 4. MANUAL ON/OF: Short pressing: start or stop spraying snow. Long pressing: switch air volume 50%/100%/AUTO. 5.TIMER ON/OFF: Short pressing: start or stop timing of spraying snow. Long pressing: switch air volume50%/100%/AUTO. Set values are automatically saved. Control priority order: When both DMX console and VT-1 are connected to the machine, appears problem of priority among the panel control, DMX console and VT-1 controller. There’s no apparent priority among the three controls.
-
Page 15: Operation
Operation Plug mains power cord from the snow machine into appropriate power supply socket; Regardless of the machine in which mode, the main display information as shown on the left: --FN20--: shows lighted mode of the display. H: s hows the state of air volume, as shown in Figure H — — FN2.0 — — that air volume is 50%. H> > > V 1 Vx: shows the current set of snow volume, as shown in Figure V1 that snow volume of 1%.Please do follow the required operating modes; Panel Continuous Snow Mode Operation ........“Manual ON/OFF” control, when the external controller or DMX signal is not connected. Press MENU to select the SNOW status; use Up/ Down button to switch fixed volume (=V1~100) SNOW and random volume (=Auto). The left icon is SNOW AUTO in Auto volume;... - Page 16 Press Manual ON/OFF button again to stop snow spray; LED upper the button off. • When turn on the Manual ON/OFF button operation, still could use Up/Down button to control snow increase and decrease. • When turn on the Manual ON/OFF button operation, long pressing the Manual ON/OFF button to change air volume. Panel Timing Snow Mode Operation ..........“Timer ON/OFF” control, when the external controller or DMX signal is not connected. Press MENU to select the SNOW status; use Up/ SNOW Down button to switch fixed volume (=V1~100) and random volume (=Auto). The left icon is SNOW AUTO in Auto volume; Press MENU to select the WIND status; use Up/Down WIND button to switch air volume. There are three changes: AUTO Half =50%, Full=100%, and Auto= random volume. The left icon is WIND in Auto volume; Press MENU to select the Interval status; use Up/ In t e rva l Down button to switch the value of interval, the range is 20~2000 seconds;...
- Page 17 The display information as shown on the left: The upper left for the DURATION, shown as 6 seconds; the upper right for the INTERVAL, as shown in Figure 20 seconds A> V100 The left lower for air volume, as shown in the figure AUTO; the lower right for snow volume, as shown in Figure V100%; 7. Press Timer ON/OFF button again to stop timing snow spray; LED upper the button off. • When turn on the Timer ON/OFF button operation, still could use Up/Down button to control snow increase and decrease. • When turn on the Timer ON/OFF button operation, long pressing the Manual ON/OFF or Timer ON/OFF button to change air volume. Remote Control Operation .............. For best result, use VT-1 wired controller.
- Page 18 2. There are 3 DMX modes for choice; 1CH, 3CH, & 5CH, please choose the DMX mode by MENU Press MENU to select the DMX Mode status; DMX MODE use Up/Down button to switch 1CH, 3CH and 5CH. 1 CH Save automatically after the set; Press MENU to select the DMX ADDR status; DMX ADDR press Up/Down button to set the DMX address. Save automatically after the set; 5. If desired, connect another snow machine: Plug one end of another signal cable in to the output socket (Figure 1-O or Q) on the back of the first BURAN 1300; plug the other end of the signal cable to the input socket (Figure 1-P or R) on the back of the second BURAN 1300. Follow the same procedure to link more snow machines, if desired; whole link is daisy chain; 6. Down. Refer to DMX channel chart in Figure 2 make related settings. Now start operating BURAN 1300 with DMX console. Set values are automatically saved. MT-4 link more snow machines...
- Page 19 Figure 2 DMX Chart 1 CH DMX Value Snow Volume AUTO 250-255 Random Snow 100% 0-249 The air volume setting needs to be set in the panel. 3 CH DMX Value Snow Volume DMX Value Air Volume DMX Value ON/OFF AUTO AUTO 250-255 250-255...
-
Page 20: Troubleshooting
Troubleshooting This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps. If the problem persists, refer servicing to a qualified technician. Power Connected but No Snow is Emitted: 1. Check the power supply. Plug the unit into grounded electric power supply socket with proper voltage; 2. LCD display is lit and check if it can operate; 3. The control panel operation is correct; 4. -
Page 21: Maintenance
Maintenance Before doing maintenance, please make sure that the power is cut, the power cord is unplugged, and the machine itself has cooled down. The maintenance must be done by qualified person. 1. When the snow machine is idle and does not work, it is recommended to empty the tank and make a cleaning procedures: put the water into the tank, in accordance with spray snow operation to clean the interior of the snow machine until the water is almost no foam so far; 2. The fluid is not allowed to get dirty. Be sure to always clean or replace the caps on the tank (Replace the caps on the tank directly. This kit includes quick connector, cap, pipe and filter) and tight the cover of the snow machine tank immediately after filling; 3. Remove the black cloth of the nozzle, cleaning or replacement of the nozzle, the nozzle need to maintain unobstructed; Method of removing the core Method of removing spring and exit black cloth the metal nozzle Nozzle Clip out the black tie band on the metal nozzle and remove the nozzle... - Page 22 4. Prolonged use, the black cloth of the nozzle may become dirty, please clean or replace the new nozzle cloth; 5. Prolonged use, air filter of inlet next to the tank can accumulate dust, periodically remove the air filter to do the cleaning, after cleaning, be sure to dry the air filter after replacing it again. Magnetic air filter The air filter is adsorbed on the mesh of the inner air inlet 6.
-
Page 23: Product Specification
Product Specifications Model No. BURAN 1300 Name BURAN 1300 Consumption 1250W Fuse(120V) NFB 16A Fuse(230V, 240V) NFB 9A DMX512 CH. 1CH, 3CH, or 5CH Manual snow and air volume adjustment On Board Control Automatic snow and air volume adjustment Timing Snow Low Fluid Shutdown Fluid Consumption Rate (ml/min.) Snow Highest Height (m) Snow Longest Distance (m) Display Tank (L) Hanging Bracket DMX Connectors 3P & 5P XLR Remote Connector 1/4” JACK Voltage 120V/60Hz; 230V,240V/50Hz... - Page 24 Appendix – A VT-1 Volume Adjustable Controller Operation: The Snow Machine is designed with volume adjustable controller. Detail operation as bellows; 1. Firmly attach the remote control mechanism to socket (Figure1-N) on the back of the snow machine; 2. Plug mains power cord from the machine into appropriate power supply socket; 3. This controller knob can control the two functions: snow volume and air volume; A. Snow volume adjustment: 1 When the adjustment knob is turned on, turned counterclockwise to the end (note that the switch does not turn off at this time), snow spraying is shot down, turned clockwise, function of continuous snow spray is started; 2 Turning the knob counterclockwise to decrease snow volume; clockwise to increase snow volume. B. Air volume adjustment: 1 Each time you switch the knob OFF-ON (there will be Kara sound), you can switch the different air volume; 2 The process of OFF-ON of the knob allows to switch the three different air volume. Specific changes are 50%, 100%, AUTO.
- Page 25 Appendix – A VT-1 A- 1/4” stereo jack B- Knob C- Green LED (Snow and Air volume output) D- Red LED (power) Controller power cord length: 3 m; Connector: 1/4 “stereo jack; Function: Air volume adjustment & ON/OFF. Model VT-1 Cable Length Effective Distance Connector 1/4” stereo jack Function • ON/OFF • Volume adjustment Dimension (LxWxH) 90 x 50 x 39 mm Weight 0.257 kg...
- Page 26 Save this instruction properly All the information is subject to change without prior notice...
Need help?
Do you have a question about the BURAN 1300 and is the answer not in the manual?
Questions and answers