Programme Skip - Toshiba 42/51WH46 Owner's Manual

The television can be tuned-in manually using Manual tuning. For example: if the television cannot be
connected to a VCR/decoder with a SCART lead or to tune-in a station on another System (see page 8).
Use S and R to move across the screen and select any of these Manual Tune options.
Programme
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. See step 4 on page 8.
Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from
external source.
Search: Search up and down for a signal.
Programme skip: * means nothing has been stored or the facility to skip the channel is ON. See page 10.
Channel: The channel number on which a station is being broadcast.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 11.
Station: Station identification. Use the P or Q and S or R buttons to enter up to seven characters.
To allocate a programme position on the television for a decoder and VCR: turn the decoder on,
Press MENU and using S or R select the SET UP
1
menu, with Q highlight Manual tuning, press
R to select.
SET UP
Language
Country
Auto tuning
Manual tuning
Programme sorting
AV connection
Horizontal position
Convergence
EXIT : To exit
Use P or Q to highlight the programme
2
position required e.g. we suggest Prog. 0 for
a VCR.
Manual tuning
Prog. Sys.
0 I
1 I
2 I
3 I
4 I
5 I
OK : To select
EXIT : To exit
Manual tune
System Colour Search
insert a pre-recorded tape in the VCR and press PLAY, then manually tune.
English
UK
Channel Station
M
60 VCR
22 BBC1
28 BBC2
25 ITV
32 CH4
* 69
M
Programme
Channel
skip
Press OK to select. If the programme is skipped,
3
Programme skip must be removed before
storing.
Manual tuning
System
MENU
EXIT
Press R to select System and use P or Q to
4
change (if required, see step 4 on page 8).
Then press R to select Search.
5
Press P or Q to begin the search.
6
Search will appear and the television will show
the channel numbers.
Manual tuning
Searching
MENU
EXIT
9
Manual fine Station
tuning
M
0 I A 60
M
OK : To store
: To return
: To exit
M
0 I A 32
RRR
M
OK : To store
: To return
: To exit
Continues on the next page
0 VCR
0