Download Print this page

Quantum Genius Moving Straps Manual

Download this manual

INSTRUCTIONS

Thank you for purchasing the Quantum Genius Moving Straps!

For your safety, you must carefully read and understand these

instructions before using the product.

SAFETY NOTICE: Must be operated by two people.

Lifting heavy objects can result in serious injury. Take all

appropriate cautions and use the product as instructed.

Basic Instructions for Use

1. Ensure that both users are wearing the harnesses correctly.

Adjust the pads to be comfortable on your shoulders.

3. Connect the harness buckle to the carrying belt buckles.

5. After adjusting to a good length, you can keep excess strap

out of the way by bringing the end of the strap to the buckle

and placing the loop into the hook as shown above.

2. Connect the chest strap on your harness. Adjust, if needed,

to t the width of your chest and shoulders.

4. Adjust the carrying belt length by pulling the strap through

the buckle.

6. Lift the furniture by bending your knees into the squat position,

keeping your back straight.

Need help?

Do you have a question about the Moving Straps and is the answer not in the manual?

Page 1 INSTRUCTIONS Thank you for purchasing the Quantum Genius Moving Straps! For your safety, you must carefully read and understand these instructions before using the product. SAFETY NOTICE: Must be operated by two people. Lifting heavy objects can result in serious injury. Take all appropriate cautions and use the product as instructed.
Page 2 4 Methods of Attaching the Carrying Belts 2. Looped X Shape Method 1. X Shape Method Step 1 - Loop the two carrying belts together and form Step 1 - Lay two belts on ground in an ‘X’ shape. Place an ‘X’...
Page 3 Using Your Carrying Straps Correctly 3. Do not hold your arms too high when 2. Squat low when placing the 1. Make sure to lift the piece of guiding and supporting the furniture. If your carrying straps below the piece of furniture far enough o the ground arms are too high, furniture.