Learning About The Remote Control - Toshiba 40H80 Owner's Manual

Learning about the remote control

The buttons used for operating the TV only are described here. For a
complete list of the remote control's functions, see the "Remote Control
functional key chart" on pages 13–14.
turns the TV on and off (page 51)
POWER
allows access to the automatic TV shut-off function (page 45)
SLEEP
The first press of the LIGHT button lights the keypad and turns
LIGHT
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you're in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
allow direct access to channels (page 25)
Channel Numbers (0-9, 100)
cycles through the six device modes: TV, CABLE/SAT, VCR,
MODE
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for 10 seconds (page 15).
cycles through the three picture sizes: Normal, Theater Wide,
PIC SIZE
and Full (page 30)
allows access to the favorite channel search function (page 34)
FAVORITE
allows access to on-screen programming menus (page 22)
MENU
sets programming menu information (page 22)
ENTER
select or adjust programming menus (page 22)
yz x • Buttons
cycles through programmed channels (page 25)
CH yz
adjusts the volume level
VOL yz
exits the programming menus (page 22)
EXIT
selects the video input source (page 43)
INPUT
mutes the sound (page 46)
MUTE
displays on-screen information (page 50)
RECALL
returns to the last viewed channel (page 27)
CH RTN
toggles between TV and VCR modes
TV/VCR
selects the POP (picture-out-picture) channel (page 33)
PIP CH yz
turns the POP feature on and off (page 33)
PIP
freezes the POP picture (page 34)
STILL
switches the main and POP pictures (page 34)
SWAP
selects the POP picture source (page 33)
SOURCE
AM/FM
DISC
21