AQUAMAXX Omega Series Quick Start Manual

Biopellet reactors

Advertisement

Installation Guide
Please open the package carefully and check for damaged or lost parts.

Parts Included

1. Omega BioPellet
reactor
2. Sicce Syncra pump

Assembly

1. To open the body cover, loosen the thumb screws on the reactor body.
2. Pour your media into the body chamber. It is recommended that biopellets are soaked for 24 hours
in aquarium water before use. Be sure not to overfill the media chamber using the following
quantities as a guideline:
OMEGA-1 <500ml
OMEGA-2 <1000ml
3. Replace the cover. Tighten the screws in a star pattern to evenly secure the body cover. CAUTION:
DO NOT OVER TIGHTEN THE SCREWS.
4. Connect the water outlet of the pump to the main reactor body.
Omega Series BioPellet Reactors
www.aquamaxxaquariums.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Omega Series and is the answer not in the manual?

Questions and answers

Summary of Contents for AQUAMAXX Omega Series

  • Page 1 Omega Series BioPellet Reactors Installation Guide Please open the package carefully and check for damaged or lost parts. Parts Included 1. Omega BioPellet reactor 2. Sicce Syncra pump Assembly 1. To open the body cover, loosen the thumb screws on the reactor body.
  • Page 2 Products requiring warranty service must be returned to AquaMaxx. You are responsible for the cost of shipping a warranty claim to AquaMaxx and any damages that may occur during transit. Once a returned product has been inspected, it will be repaired or exchanged at our discretion and returned to you.

This manual is also suitable for:

Omega-1Omega-2

Table of Contents