It is located on the top left corner of the screen. The latest firmware is available from our website: www. kiss-technology.com/software. Refer to the "Updating the player" section of this manual or the website's online guide for in-depth guidance.
What's in the box... The following elements are included in the box. KiSS DP-558 KiSS PC-Link Software CD Batteries for the remote Remote Control Power cable Composite Video Antenna Cable SCART Cable S-Video Audio cable Provided in Europe only Not provided in Europe...
Overview... Front panel 1 On/Off 10 Menu 2 CD Tray 3 Open/Close Option on the Setup Menu 4 Play/Pause 11 Enter 5 Stop 12 Navigate Left 6 Previous Chapter 13 Navigate Right 7 Next Chapter 14 Navigate Up 8 Rewind 15 Navigate Down 9 Fast Forward 16 Close...
How to connect my player... Video connection Connecting your KiSS DP-558 DVD player to your TV can be done using any of the cables below. (Only one cable can be connected at a time) 1 RGB via SCART 2 S-Video (the cable is an extra accessory)
5 Open KiSS PC-Link, select the info tab, and write down the IP address displayed. 6 Start the player, select MENU and then select IP Confi guration. Check that DHCP Client is ON, then select “Enter IP for KiSS PC-Link” in the KiSS PC-Link menu.
Page 7
4 Your only option will be to use a router. 5 If you have any problems please check the FAQ on our web site for any questions, and if that doesn’t help then contact the KiSS Hotline. Your player should now be connected...
Quick setup... If your DVD Player is correctly connected, the language selection menu will appear 1. Language selection Select your preferred language 2. Geographical selection From a list, choose the part of the world you live in. Then select your country followed by date and time. 3.
6. Hard Disc Formatting Once done, you will be asked to format (erase) your Hard Disc. KiSS advise you to do this the first time you connect your player. Remember that formatting the hard disk will delete all content held on it.
Advanced setup... Accessing the advanced setup menu by pressing SETUP on the remote control will enable the user to edit and modify the settings of the DVD Player as follows: Regional settings This menu enables you to specify the country in which this player is being used. You can also edit the time zone where you are situated.
Page 11
You can also restore the default settings of your player, read legal text in "About the 558" or choose to go back to the Quick Setup menu. - For more information about setting up a network, please refer to the “PC to DVD Connection...” section of this manual, or the connecting guide available at www.kiss-technology.com, in the “support” section under “online guides”: www.kiss-technology.com/support...
Playing media... This product supports the following media: DVD, MPEG-4, DivX, XviD, Audio CDs, MP3, Ogg Vorbis and Jpeg file formats. Playing DVDs Press the EJECT button on the front of the player or on the remote to open the drawer. Place the DVD in it to start it automatically. After a few seconds the DVD menu will appear.
Player ID This menu will reveal your KiSS DP-558 Identification Number. This code is usually a set of 2 letters followed by 9 figures and 2 more letters. When contacting the KiSS Customer's Service, this code will be needed. It can also be found at the back of the player below the barcode.
We advise you to watch the television through the DP-558. Just use your TV as a picture display while the KiSS DP-558 will be at the center and host all the commands you need to change channels. It will make it easier and quicker to use the recording functions.
Page 15
Viewing scheduled recordings This menu item brings up a calendar list of scheduled recordings. It enables you to edit or erase a scheduled program by pressing play/pause or erase accordingly. Editing already scheduled recording This lets you change the time, date and channel of scheduled recording. Setting quality Specify the recording quality.
- Only computer generated files can be copied onto the hard disk. DVDs, audio CDs, VCDs and SVCDs can not be copied - The FTP access only works if the KiSS Player and the PC are connected on the same network via the Ethernet Port. Check the “PC to DVD Connection” chapter of this manual if you are unsure...
Page 17
- KiSS MacLink can only be used on an Apple Macintosh running at least OS X 10.2. - KiSS MacLink is developed by Jonathan Pepin for KiSS Technology. For this reason, this information is provided as help. KiSS will not provide any support on using KiSS MacLink.
Advanced functions... Some special functions and shortcuts to some of the main functions have been given to some of the remote buttons. Find below a list of them and their use. Menu Access the player's main menu List Gets file info and options Setup Access the advanced setup section of the Player Mark...
Updating the player... KiSS is always keen to update its products to make sure that the user takes advantage of new features or bug fixes. Updates are regularly posted on KiSS’ website in the support section. When the “Firmware warning” option is activated in the “Misc. Settings” of the “Advanced setup”, a message will appear on the top right corner of your screen in the “Advanced Setup”...
The repair or replacement of defective components is based on an assessment by KiSS. Exchange is only To reset the settings of the DP-558, press the following buttons on the remote control: possible if the repair cannot be performed.
Contacting KiSS... For questions or problems with your product, KiSS provides an international customer service. Telephone calls or e-mails can be addressed in English, French, German, Spanish, Italian, Danish, Swedish and Norwegian KiSS Technology A/S Slotsmarken 10 DK-2970 Hørsholm Denmark www.kiss-technology.com...
Need help?
Do you have a question about the DP-558 and is the answer not in the manual?
Questions and answers