Default Settings; Communication Parameters - Honeywell IS220 User Manual

Default Settings

Communication Parameters

Many functions of the scanner can be "configured" - that is, enabled or disabled. The scanner is shipped from
the factory configured to a set of default conditions. The default parameter of the scanner has an asterisk ( * )
in the charts on the following pages. If an asterisk is not in the default column then the default setting is Off or
Disabled. Every interface does not support every parameter. If the interface supports a parameter listed in the
charts on the following pages, a check mark will appear.
Parameter
UPC/EAN
Code 128
Code 93
Codabar
Interleaved 2 of 5 (ITF)
MOD 10 Check on ITF
Code 11
Code 39
Full ASCII Code 39
MOD 43 CD on Code 39
Transmit Mode 43 CD
Paraff
Paraff Lead "A"
Allow Paraff Failures
French PC Terminal
MSI-Plessey
Airline (15 digit) 2 of 5
Airline (13 digit) 2 of 5
Matrix 2 of 5
Telepen
UK Plessey
STD 2 of 5
MSI-Plessey 10/10 Check Digit
MSI-Plessey MOD 10 Check Digit
ITF Symbol Lengths
ITF Minimum Symbol Length
Symbol Length Lock
Minimum Symbol Length
Trioptic
GS1 DataBar Enable
Default RS232

*
























Variable

6

None

4


19