EZ-ON MAX II Manual

EZ-ON PRODUCTS
MAX II

IMPORTANT INFO

• Meets FMVSS213 when used with Max 2 Vest.
• Use only with EZ-ON Vest. Compatible Vest include: MAX II
• Use on school bus seats that have entry between the seat bottom and seat back.
• Passengers seated behind occupants with MAX II seat Mount must be wearing a seatbelt,
a transportation vest, or must be unoccupied.
• Register this product to be notified of a safety recall.

WARRANTY

EZ-ON Products stands behind the products we make. Warranty covers any defects in material or workmanships under
normal use during the warranty period. We will repair or replace product defects for 1 year from manufacturer date.

WARNING

Death or serious injury can occur If manufacturer's instructions are not followed correctly.
All EZ-ON products are dynamically tested to meet NHTSA standards. Please follow washing
instructions on product tag. Replace product if it is damaged, frayed, or has been in a crash.
Recommended replacement after six years.
EZ-ON Products are not liable for injury if these recommendations are not followed.
When evacuating the passenger in a safety vest, the vest webbing is never cut.
Three cuts of the portable seat mount webbing below the buckle and adjusters will
allow the passenger to evacuate the bus wearing the safety vest.
FOR SCHOOL BUS USE ONLY

EMERGENCY RELEASE PROCEDURE

1-800-323-6598
www.ezonpro.com