WARRANTY While we utilise the best manufacturing practices, there are occasional cases of product failure, and this warranty policy covers these instances. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
Page 3
HARD KORR. Our aim is for you to be completely satisfied with your purchase, and therefore your new HARD KORR product is backed by a comprehensive 2-year warranty and an outstanding after-sales customer service team.
GENERAL INFORMATION & SAFETY INSTRUCTIONS This solar controller must only be used for the prescribed purpose. Any uses other than those mentioned in this manual will be considered a case of misuse. The manufacturer will not be liable for any damage or injury resulting from such cases of misuse. To use the solar controller properly you must observe the safety instructions and operating instructions found within this manual.
PRODUCT FEATURES Built-in industrial class microprocessor. 2. Large LCD display with user-friendly interface. 3. 5-stage PWM charge management with separate programs for AGM, Wet and Gel batteries. 4. Built-in short circuit protection, open circuit protection, overload protection and reverse charge protection. 5.
DISPLAY SETTINGS Press 1 main display 2 float voltage Arrow-Up to cycle through the 6 menu op- tions. Hold for 3 seconds whilst in menu op- tions 2-5 to adjust setting and use 6 battery type 3 load reconnect voltage to set parameter.