Digital Treasures TurtleCell Series User Manual page 4

iP5-5s-UG-Eng_TurtleCell_iPhone5-5s_UserGuide_Layout 1 1/30/15 11:42 AM Page 4
Putting Your iPhone ® Into Your TurtleCell
1
Pull the top part of the case away from the bottom part
of the case.
2
Slide your iPhone ® into the case bottom-end first to align
audio port and jack.
3
Slide the top part of the case into position over the top end
of your iPhone.
4
Listen for the click as you slide the top part of the case
securely into place.
™ Case
4
Pulling the Headphones Out of Your TurtleCell Case
Push the Headphone Retraction Button
To extend the headphones from the case, hold the Headphone Retraction
Button down and gently push back on the headphones to release them
from their seated position. Continue holding the Headphone Retraction
Button down while gently pulling the headphones away from the case.
Retracting the Headphones Into Your TurtleCell Case
1 Pull Gently on the Headphones
To retract the headphones into the case, hold the headphones and gently
pull the headphone cable taut.
2
Push the Headphone Retraction Button
Maintain tension on the headphone cable and press the Headphone
Retraction Button, gently guiding the headphones as they retract to
their seated position.
IMPORTANT: Do not press the headphone Retraction Button without
maintaining cable tension, as this may result in improper retraction.
5