Advertisement
EFX
Low Level Fog W-1200 Machine.
This high powered continuous output machine produces a low lying fog which
flows over the floor. The clever use of standard smoke fluid and combination of
distilled water produces the low lying smoke effects using Ultrasonic
technology.
The unit comes with two output nozzles on adjustable ducting and is supplied
with a Flightcase.
Specifications:
• Input Voltage: AC110/240V, 50/60Hz
• Power consumption: 1200W
• Display: LCD display
• DMX Channels: 2CH
• Operation modes: DMX512, Wireless control
• Pre-heating time: 4 minutes
• Oil Tank capacity: 0.8 Litre
• Water Tank capacity: 3 Litre
• Fog output: 3500cuft/min
• Cover area: 50-80 square meter
• Continuous fog output
• Water level and fluid level indicate
• Housing: stainless steel in black colour, come with flight case
• Only use distilled water to cool the fog
• Ultrasonic cool mist system
• Dimensions: 600mm (L) x 420mm (W) x 520mm (H) (Flightcase)
• Weight: 26Kg
(Entertainment FX)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EFX W-1200
Summary of Contents for EFX W-1200
- Page 1 (Entertainment FX) Low Level Fog W-1200 Machine. This high powered continuous output machine produces a low lying fog which flows over the floor. The clever use of standard smoke fluid and combination of distilled water produces the low lying smoke effects using Ultrasonic technology.
-
Page 2: Safety Instructions
• Ensure the machine is cleaned after 40 hours use. Smoke Fluids The W-1200 machine uses Ultrasonic agitation technology which converts water into a mist and mixes this with a traditional low level smoke fluid to create an amazing low level fog. - Page 3 Care of the machine: Keep your machine serviced and regularly cleaned to help reduce the cost of repair and spare parts. When transporting the machine it is recommended to empty the fluid tanks to avoid accidental spillage. An outlet key is located under the machine. It is recommended that the machine is cleaned after 40 hours use, we suggest a mix of 80% distilled water and 20% vinegar should be used to clean the Ionisation chamber (Water tank).
- Page 4 Control System. The machine is supplied with a separate wireless remote, this will allow the user to switch on or off the machine manually. The machine can be controlled manually from the panel located on the rear of the panel or can be controlled via DMX.
- Page 5 Instructions for use:- Ensure the machine is laid flat. Open the Oil tank (0.8 litre) located at the rear of the machine and fill with heavy Fog Fluid. Open the front of the machine and fill the water tank (3 litres) with distilled water Once the tanks has been filled close immediately to avoid any contaminants gaining access.
Need help?
Do you have a question about the W-1200 and is the answer not in the manual?
Questions and answers