Table of Contents
Advertisement
4.2.2 Timer Recording
Timer recording provides two periods of time each day in a weekly table which programs the DVR to
turn on and off at specified times. This way the DVR will start and stop recording according to the
programmed schedule. Please take the following steps to program the scheduled recording.
(1) Press the SETUP button
(2) Select the RECORD TIMER and press the ENTER/SAVE button
(3) Select the TIMER-SET.
ENTER
(4) Press the
/
ENTER/SAVE button
SAVE
(5) Use the
button
button
and the
a 24-hour clock format.
(6) After scheduling is completed, press the
setting or select CANCEL to leave the page without saving the settings.
(7) To activate the programmed recording schedule, set the REC ENABLE to ON. As the scheduled
recording is on, the red indicator of the Timer Record will be on as well. To deactivate it, set to OFF.
(8) Press the
STOP button
continue the scheduled recording, press the REC button
NOTE: You can proceed to start the scheduled recording from the current time if it is in the
scheduled interlude as soon as setting is completed. Press the REC button to proceed.
NOTE: If you activate the recording function before the scheduled recording, the unit will
operate recording as showed the diagram below and keep those Image in different files.
03:00
Start Manual
Recording
to enter the MAIN MENU.
and the
button
button
to set the day/hour/minute you wish. The time is displayed in
during the scheduled recording to stop it at any time. If you wish to
START
END
06:00
08:00
Timer
to enter the REC SCHEDULE table.
to locate the specific day/hour/minute and use the
ENTER
/
ENTER/SAVE button
SAVE
to proceed.
START
12:00
Manual
19
to enter the TIMER page.
and set OK to save the
END
14:00
Timer
Manual
Advertisement
Table of Contents
