Mincey Marble Manufacturing SP3738-C/IF Installation Instructions

Standard rectangle cast marble shower pans

Advertisement

Mincey Marble Mfg., Inc.
4321 Browns Bridge Road
Gainesville, GA 30504
Ph: 800.533.1806
Fx: 770.531.0935
www.minceymarble.com
Installation Instructions for Mincey Marble Manufacturing's
Standard Rectangle Cast Marble Shower Pans
Part number: SP3738 – C/IF
Please read the following before attempting to install your
37" x 38" cast marble shower pan
These instructions have been written for Mincey Marble's SP-3738- C/IF cast marble
shower pan. If you have a different pattern than shown, please call us for instructions for
the design you received.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP3738-C/IF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mincey Marble Manufacturing SP3738-C/IF

  • Page 1 Gainesville, GA 30504 Ph: 800.533.1806 Fx: 770.531.0935 www.minceymarble.com Installation Instructions for Mincey Marble Manufacturing’s Standard Rectangle Cast Marble Shower Pans Part number: SP3738 – C/IF Please read the following before attempting to install your 37” x 38” cast marble shower pan These instructions have been written for Mincey Marble’s SP-3738- C/IF cast marble...
  • Page 2 All shower pans rest on sub-floors not finished floors. Mincey Marble’s cast marble shower pans have been checked and leveled before leaving the shop. They have been custom designed to drain properly if installed on a level surface. IMPORTANT: Do not use the integral flanges to lift the pan. They are not handles and it is critical that they are not damaged or broken in any way during installation.
  • Page 3 The plumber should connect the drain to the pan and set the pan in place. Substrate material (sheet rock, etc.) should not be installed until after the plumber has connected the plumbing to the pan. The substrate material should stop about one inch above the flange of the pan (See drawing).

Table of Contents