Getting Started - Canon ivy REC User Manual

Press on the latch release button, and slide the side cover upward to open it.
Insert the smaller end of the supplied USB cable into the device and the other end into
a chargeable USB adapter.
The Mode LED will turn red to indicate charging.
Once fully charged, the Mode LED will turn green.
- Operating time may vary depending on the battery status, operational status and
environment conditions.
NOTE
• When you close the cover, make sure the side cover returns to the
position shown.
ABOUT USB CABLE
HANDLE THE USB CABLE WITH CARE WHILE CHARGING
• Do not place any heavy objects on top of the cable.
• Do not place the USB cable near heat.
• Do not scratch, damage, twist or pull hard on the cable.
• Do not plug or unplug the cable with wet hands.
• Avoid too high/too low temperature or humid conditions.
• Please unplug the USB cable from the power source after charging.
• Please use the supplied USB cable for charging.

GETTING STARTED

CHARGING
MODE LED
Charging: Red
Fully Charged: Green
7