Pool Blaster Centennial Li Installation Manual

Your new kit includes:
Motor Box (P20X003LI)
Charger (LC099-2S-US-EU)
STEP 1: Use drill or screwdriver to unscrew the
four screws located at the exhaust of the unit
(2 screws on each side). Place screws to the side.
Installation Guide - NiMH to Lithium
®
Upgrading the Pool Blaster® Centennial Li/Eclipse Li Motor Box
Phillips screwdriver or battery
powered screwdriver
(set at low torque setting)
Need Help? Contact Customer Care at (732) 967-9888
Why did my new motor box kit come with a charger?
This complete kit replaces all of the electronics for the Pool
Blaster® Centennial Li/Eclipse Li and will guarantee that your
machine will be repaired and increase the longevity of your
battery.
Your old charger will not work. Please dispose of
your original charger.
You will need the following tools:
STEP 2: Remove old motor box from the unit.
Pliers and cutters
1