One Identity Safeguard 2000 Setup Manual page 18

Hide thumbs Also See for Safeguard 2000:
Table of Contents

Advertisement

Power Disconnection Warning
WARNING:
The system must be disconnected from all sources of power
and the power cord removed from the power supply module(s) before
accessing the chassis interior to install or remove system components.
Equipment installation
WARNING:
Only trained and qualified personnel should be allowed to
install, replace, or service this equipment.
Restricted area
WARNING:
This unit is intended for installation in restricted access areas.
A restricted access area can be accessed only through the use of a special
tool, lock and key, or other means of security. (This warning does not
apply to workstations).
Battery handling
WARNING:
There is a danger of explosion if the battery is replaced incor-
rectly. Replace the battery only with the same or equivalent type recom-
mended by the manufacturer. Dispose of used batteries according to the
manufacturer's instructions.
Redundant power supplies
WARNING:
This unit might have more than one power supply connection.
All connections must be removed to de-energize the unit.
Backplane voltage
WARNING:
Hazardous voltage or energy is present on the backplane when
the system is operating. Use caution when servicing.
Comply with local and national electrical codes
WARNING:
Installation of equipment must comply with local and national
electrical codes.
Safeguard for Privileged Passwords Appliance Setup Guide
Standardized warning statements for AC systems
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Privileged passwords 2000

Table of Contents