Elster EM260 Manual
  1. Manuals
  2. Brands
  3. Elster Manuals
  4. Modem
  5. EM260
  6. Manual
Elster EM260 Manual

Elster EM260 Manual

With volume corrector ek260
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Manual EM260
with Volume Corrector EK260
with Volume Corrector EK260
Manual:
Release:
1
2
3
4
5
6
7
8
9
10
11
12
13
Betriebsanleitung-EM260-EK260_en_f.doc
Manual EM260
no ID
05.07.07
Contents
EK260
Version:
f
Edition:
-
2
2
3
3
3
4
5
5
5
6
6
6
6
7
8
1 of 8

Advertisement

Table of Contents
loading

Related Manuals for Elster EM260

Summary of Contents for Elster EM260

  • Page 1: Table Of Contents

    SETTING THE PARAMETERS FOR THE COMMUNICATION MODULE REPLACEMENT OF COMMUNICATION MODULES POWER SUPPLY OPERATING STATUS DISPLAY JUMPER MODEM RESET 11.1 Modem-Watchdog 11.2 Cyclical modem reset via output 4 of the EK260 OPERATING AN EM260 WITH INTEGRATED GPRS-TSC MODEM TECHNICAL DATA Betriebsanleitung-EM260-EK260_en_f.doc 1 of 8...

  • Page 2: Safety Instructions

    EM260 to avoid any damage, dangers or problems. Assembly and installation should be carried out by qualified personnel ! The ‘AC’ version of the EM260 has a power supply of 90...260 V. Do not touch any live parts as this is extremely dangerous !

  • Page 3: Wiring Em260 Ek260

    5 Settings of the internal serial interface in the EK260 If the EK260 is delivered together with the EM260, the EK260´s internal serial interface as well as the communication module integrated in the EM260 are properly set by Elster-Instromet exworks.

  • Page 4: Setting The Parameters For The Communication Module

    According to the settings in the CL1 modem and the other devices installed in the current loop (CL). This setting (number of rings) is not used in mode 5. In mode 5 the communication module in the EM260 always picks up an incoming call after the first ring signal.

  • Page 5: Replacement Of Communication Modules

    Elster-Instromet exworks (refer to the table in chapter 6). The replacement of a communication module by another communication module of a different type (e.g. analogue modem replaced by ISDN adapter) can only be carried out by Elster- Instromet exworks or by Elster-Instromet´s customer service.

  • Page 6: Jumper

    To activate the modem reset function, it is necessary to send a special parameter file to the EK260 and to modify the wiring between the EM260 and the EK260 (see below). Before activating the modem reset function, the following conditions must be fulfilled: The version number of the Wavecom-Integra-Adapter board (ID no.

  • Page 7: Operating An Em260 With Integrated Gprs-Tsc Modem

    Wiring instructions for cyclical modem reset If a cyclical modem reset is to be carried out and if all conditions for its use are fulfilled (see above), the wiring between the EM260 and the EK260 must be modified as follows: EK260 clamp...

  • Page 8: Technical Data

    Ambient humidity: max. 93%, non condensating • Declaration of EU conformity in accordance with the current version of the EMC-Directive 89/336/EEC: The product ‘EM260’ conforms to the current versions of the following standards: Emission EN 55011 Class B (for domestic and commercial applications) Immunity...

Table of Contents