Advertisement
LIEBERT® INTELLISLOT™ RDU101™ COMMUNICATIONS CARD
Quick Installation Guide
5. Change the user names
and passwords
NOTE: We recommend
changing the administrative
and general user names and
passwords immediately to
safeguard the protected
configuration and control
options of the card.
On the Web UI, click the
Communications tab, then in
the Communications -tab menu,
select Configuration > Local
Users.
• Select Local Users [1].
To contact Vertiv Technical Support: visit www.VertivCo.com
© 2019 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names,
trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no
responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
2
590-2176-501A/SL-31321_REV0
• Click Edit and enter the
default user name and
password (default user name
Liebert and password
Liebert).
• Enter the new Administrator
name.
• Enter and confirm the new
administrator password, then
click Save.
• Select Local Users [2].
• Click Edit and enter the new
General user name.
• Enter and confirm the new
general user password, then
click Save.
The settings take effect
when the card is restarted.
ONLINE USER MANUAL
This quick-installation guide
provides the information to install
and configure the RDU101 card. We
highly recommend that you consult
the user manual, Liebert IntelliSlot
RDU101 Communications Card
Installer/User Guide, available on
the product page at
www. V ertivco.com.
Advertisement
