Advanced playback
Selecting the sound enhancement (E.A.M.*)
You can easily switch the sound enhancement to your preference.
*E.A.M.: Enhanced Audio Mode
DVD
Selecting the sound enhancement
VCD
CD
1
Press E.A.M.
The sound enhancement selection
E.A.M.
appears.
2
Select the sound enhancement by
pressing E.A.M. or
Each time you press the button, the sound
enhancement changes.
Normal:
Normal sound.
3D (N-2-2):
To obtain expansive virtual surround
sound effects from just two speakers.
Dialogue:
To control dynamic range to make
dialogues easier to hear (only when
playing a DVD video disc recorded
on the Dolby Digital recording
system).
• To use this enhancement on
sounds output from the
BITSTREAM/PCM (DIGITAL)
AUDIO OUT jack, be sure to set
"Audio Out Select" to "PCM".
32
Notes
• Actual effects to sounds may vary depending on the
• Actual effects to sounds may vary depending on the disc.
• When the DVD video player is connected to an amplifier
• Selecting "Dialogue" disables "Dynamic Range Control"
/ .
40
To turn off the audio enhancement selection
Press ENTER.
Alternatively leave the DVD video
player unoperated for about 5
ENTER
seconds after having made the
selection.
speakers. Make the selection to your preference.
equipped with Dolby Pro Logic Surround, select "Normal".
Otherwise, Dolby Pro Logic Surround may function
differently than usual.
function
.
40
®
Spatializer
3-Dimensional Sound Processing provided by Desper
Products. Inc.
Certain audio features of this product manufactured under a license
from Desper Products, Inc., Spatializer
device are trademarks owned by Desper Products, Inc.
2
ENTER
1, 2
®
and the circle-in-square