Do you have a question about the FITPOLE SPIN and is the answer not in the manual?
Questions and answers
Summary of Contents for Ahlsport FITPOLE SPIN
Page 1
1(10) INSTALLATION, OPERATING, AND SAFETY INSTRUCTIONS FITPOLE SPIN AND FITPOLE ORIGINAL Thank you for purchasing Fitpole! You now own a masterpiece of Finnish design, manufacturing and marketing – one of the best dance poles available! The pole will be developed further based on the feedback and suggestions from the users. In case you have suggestions on how to improve Fitpole, do not hesitate to contact us.
- The manufacturer or its partners are not responsible for any injuries or material damages caused by using this product. Fitpole is not directly controlled by Ahlsport. Ahlsport, Ahlsport e-store, retailers, and salespersons or any other persons or companies cooperating with Ahlsport will not assume responsibility for any accidents to users or for any injuries or property damages to third parties.
4(10) Ahlsport, retailers or any other persons or companies cooperating with Ahlsport will not assume responsibility for any property damages or accidents caused by Fitpole. If the risk for accidents or damages is not accepted, the pole should not be used or even removed from its packaging.
5(10) How to mount Fitpole Check that the package contents correspond to Picture 1. If something is missing or damaged, contact the sales point. Screw threads are pre-lubricated before packing. You can lubricate the threads regularly, for example before every other mounting. Besides oil, you can also use for example Vaseline to lubricate the threads.
Page 6
6(10) Picture 4. Installing the washers If the ceiling is not a fixed ceiling (made, for example, of concrete slabs), it is probably made of drywall. Drywall is usually reinforced with supporting beams. To minimise the damages and maximise the safety, it is important to install the Fitpole ceiling mount precisely under a supporting beam, not between two beams (picture 5).
Page 7
(Picture 7). By holding on to the upper part with a wrench you can make sure that the locking mechanism does not rotate (Picture 7). Picture 6. Mechanism for tightening and adjusting the ceiling mount. Picture 7. How to install Fitpole (https://www.facebook.com/ahlsport/videos) 25.7.2015...
Page 8
Check the tightness of the pole after the hour of practicing. Fitpole Spin can be used both as a spinning pole and a static pole. If you unscrew the bolts (2 pcs) at the base with the hex wrench, you will get a spinning pole (Picture 8).
9(10) How to install an extension piece (sold separately) Picture 9. Fitpole extension piece (25 cm and 50cm) (WWW.FITPOLESTORE.COM) Picture 9 shows a 25 cm extension piece. The extension piece is installed between the longer parts (ceiling mount and base) as shown in picture 10. Then screw the lock screw located on the side of the pole clockwise with the hex wrench included in the package (Picture 3).
Decommissioning and disposal of consumer goods As Fitpole consists mainly of metal parts, it can be disposed of in public recycling points. IMPORTANT LINKS: https://www.facebook.com/ahlsport/ http://www.fitpolestore.com/ Contact information Manufacturer: Ahlsport Oy Poro-ojantie 7 FI-42100 Jämsä WWW.AHLSPORT.COM ahlsport@ahlsport.com Phone: +358 (0)449746363 25.7.2015...
Need help?
Do you have a question about the FITPOLE SPIN and is the answer not in the manual?
Questions and answers