Seuic AUTOID 6 Series Quick Start Manual

JIANGSU SEUIC TECHNOLOGY CO., LTD
Company address: NO.15.Xinghuo Road
Nanjing New High Technology Industry Zone, Nanjing City,
Jiangsu Province, China
Hotline: 0086-400-777-0876
Company official website: www.seuic.com
Products official website: www.chinaautoid.net
Mailbox: AUTOID@seuic.com
Post code: 210061
JIANGSU SEUIC TECHNOLOGY CO., LTD
QUICK START GUIDE
Charging indicator
Scan indicator
Touch Screen
Scan
button
Power
on/off
Fig.1
Apply series:
AUTOID® 6 series
AUTOID® 6C series
Install battery and battery cover
Take out the device, the battery and the stylus from the
package, install the battery and battery cover in according to
the instruction signs.
Initial Use
Please ensure the battery is fully charged to boost up the
system.
Power on
Stylus Silo
Press the Power on/off button until the PDA vibrates.
Power off
Press the power on/off button for 3 seconds, tap Off on the
prompted operation interface and the device shuts off. Or press
the Power on/off button for at least 5 seconds, the indicator on
the right corner goes off and device shuts off.
Sleep Mode
SIM card slot
Press the Power on/off for 1 second during working status,
Memory card
the device enters into sleep mode. Or the users can press the
slot
Power on/off for at least 3 seconds for the promoted
operation interface, tap Sleep Mode to enter into sleep.
Fig. 2
End flap cable port
Reset the device
How to reset the device:
Either scan button on both sides of the device.
Keyboard scan button.
Keyboard power button.
Press and release the above mentioned three keys at the same
time to reset the device.