Technical Specifications; Hp Support Services - HP d9510b Installation Manual

Technical Specifications

Operation Mode 720KB write/read
Disk used Normal density (2DD)
Data transfer rate Internal: Full speed mode (12M bits/sec)
USB: 250
Disk Rotational 300rpm
speed
Track Density 135-tpi
Required power +5V single (4.75 ~ 5.25) (Supplied from a USB interface board)
Signal Interface USB (Universal Serial Bus): USB Specification Ver 1.1
Width 103mm
Height 17mm
Depth 140mm
Weight 255g typ., 265g max

HP Support Services

You can get help solving problems with HP accessories from the following HP support Web site:
www.hp.com/go/support.
Information on troubleshooting the HP USB Floppy Disk Drive is also available on the HP
External USB Floppy Disk Drive Software CD-ROM.
1.2MB write/read
High density (2HD)
USB: 500
360rpm
1.44MB write/read
High density (2HD)
USB: 500
300rpm
English 3