Download Print this page

Advertisement

Quick Links

Instruction of X12 Bluetooth Headset
Thanks for purchasing Padmate X12 Bluetooth Headset. You will need to pair
the device with your mobile phone or other Bluetooth enabled devices in
order to experience its great performance. Please read through the
instruction manual below before using.
LIMPORTANCE BEFORE USING
The unit was designed and produced according to the related quality
requests and safety standards. Please read through the following
operation instructions before using it:
1. Read and keep well these instructions;
2. Do not use or operate the it where it is forbidden of using, for
example, airplanes and hospitals;
3. Do not use or operate the it according to the local laws and rules,
for example, do not use it when driving;
4. Do not use or operate it when you are close to explosive or flammable
sources, eg, gas station etc;
5. Do not hit or throw or open the unit by force as it may cause damage
to the device;
6. Do not put the unit near heat sources, eg, stoves, heat registers and
radiators etc;
7. Keep the unit away from wet, water or other liquids that might
cause short circuit or malfunctions;
8. Keep the unit and its accessories away from children to prevent being
swallowed
9. For special users, such as patients who use heart pacemakers,audiphones
and built-in cochlea devices etc,please follow the advice of doctors.
10. Using it below minus 15 _ or above 55 _ could shorten the life span
of battery.
II.About The Device
2.1 Packing list
 Bluetooth headset*1pair
 Instruction manual*1pcs
 Micro-USB cable*1pcs
 Silicon earbuds*3pair
 Quick start*1pcs
 Charging cradle with built power bank*1pcs
2.2 Device contronls and locations
1.Multi Function button
2.Silicon earbuds
3.LED indicator
4.Charging case

Advertisement

loading

Summary of Contents for Padmate X12

  • Page 1 Instruction of X12 Bluetooth Headset Thanks for purchasing Padmate X12 Bluetooth Headset. You will need to pair the device with your mobile phone or other Bluetooth enabled devices in order to experience its great performance. Please read through the instruction manual below before using.
  • Page 2 2.3 LED indications and modes Device mode LED indications(Blue & Red) Power on/Pairing Blue LED glitters Blue LED glitters and voice prompt Paired “Pairing successful, Second device successfully connected” Playing music Blue LED color glitters slowly Red LED glitters slowly and voice Low battery prompt“low battery, please charge”...
  • Page 3 3. Turn on the bluetooth application of your mobile phone and click to search Bluetooth devices near your mobile. Once searched “X12” device name, please select it to pair. After completely paired, blue LED on and voice prompt “Pairing successful, Second device connected”.
  • Page 4 3. The cradle can supply up to three times charging to the two headsets once fully charged. 4. If the cradle and headsets are charged by USB outlet, no need to press the headset charging button. All of them will be charged automatically. 5.
  • Page 5 4.2 Use them as two separate headsets: 1. The left and right headsets will automatically connect after power on in factory. The left headset for pairing will be the master headset while sub-headset for the right one. 2. If need to use them as two separate headsets, it have two way as below: A、Turn on and pair either of the headset with your mobile phone and power off the other headset.
  • Page 6 ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. FCC ID:2AJEO-X12...