1. Manuals
  2. Brands
  3. Unitec Manuals
  4. Office Equipment
  5. SSA-001
  6. Manual

Unitec SSA-001 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

1 Precautions for safety......................................................................3
2 Safety device...................................................................................4
1 Outline of mechanism .....................................................................6
1 Set-up..............................................................................................9
2. Operation ..................................................................................... 11
PDF 文件使用 "pdfFactory Pro" 试用版本创建
...................................................................................3
1-1 Precautions for safety.............................................................3
1-2 Label of warning ....................................................................3
2-1 Detail rules.............................................................................4
................................................................................6
1-1 Purpose of use........................................................................6
1-2 Main technical parameters .....................................................6
1-3 Accessories with the machine.................................................7
1-4 Outlook drawing ....................................................................7
1-1 Way of set-up and flow sequence ...........................................9
2-1 Cutting flow ......................................................................... 11
2-2 Operation panel....................................................................12
2-3 Datum selection ...................................................................13
2-4 Cutting mode .......................................................................14
CONTENT
1
www.fineprint.cn
................................9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SSA-001 and is the answer not in the manual?

Questions and answers

Summary of Contents for Unitec SSA-001

  • Page 1: Table Of Contents

    CONTENT Chapter 1 Safety ...................3 1 Precautions for safety..............3 1-1 Precautions for safety.............3 1-2 Label of warning ..............3 2 Safety device...................4 2-1 Detail rules................4 Chapter 2 General ................6 1 Outline of mechanism ..............6 1-1 Purpose of use................6 1-2 Main technical parameters .............6 1-3 Accessories with the machine..........7 1-4 Outlook drawing ..............7 Chapter 3 Set-up, operation and maintenance...
  • Page 2 2-5 Set the parameters ..............22 2-6 Way of operations and flow..........29 2-7 Way to load and unload the rotary blade assembly ....30 2-8 Way of adjustment to cut different thickness of paper ..32 3 Troubleshooting ................33 3-1 Safety cover fails..............33 3-2 Settlement of paper jamming ..........33 3-3 Long blade jam ..............34 3-4 Black Mark■...

  • Page 3: Chapter 1 Safety

    Chapter 1 Safety ● To prevent accidents and dangers from happening, the operators are required to get familiar with the precautions of safety and completely understand the content therein before set-up, operation, check and maintenance. Precautions for safety Precautions for safety To prevent any accidents, please follow the precautions below strictly.

  • Page 4: Safety Device

    Description of the warn labels: 2 Safety device To prevent accidents and dangers, safety devices are set on the positions for the operator to be possible to touch. 2-1 Detail rules 2-1-1 Detail rules and operation limit Both fixing and lock covers are set to prevent any tools and clothes from being rolled into the machine due to carelessness of the operator.
  • Page 5 2-1-2 Lock cover, fixing cover ⒈ Upper cover ⒉ Switch of lock cover ⒊ Side cover of operation (left-side cover) ⒋ Right-side cover ⒌ Front cover Fig. 1-1 Frontal Fig. 1-2 Top Fig. 1-3 Back Label of warning ⒍ ⒎ Take care of being clamped Take care of cutter edge ⒏...

  • Page 6: Chapter 2 General

    ⒑ Take care of electric shock Chapter 2 General In this chapter, information related to “card cutting machine” is recorded. 1 Outline of mechanism 1-1 Purpose of use To have the printed name cards or photos automatically cut into suitable sizes. 1-2 Main technical parameters Longitudinal: rolled cutting by a roller;...

  • Page 7: Accessories With The Machine

    Operating -15℃～+40℃ humidity 35%～70% environment Weight About 13.5Kg Power supply AC 90~260V，50/60HZ, 0.5A 1-3 Accessories with the machine Please confirm the accessories below at unpacking. Item Quantity Remark Operating instructions Name card case For collecting name cards Cross Screwdriver Used for paper thickness Synchronous belt adjustment unit Paper rubbing wheel...
  • Page 8 ⒈ left-side cover ⒉ right-side cover ⒊ operation panel ⒋ upper cover ⒌ paper feeding tray ⒍ paper feeding wheel with double rubbing ⒎ power switch ⒏ frontal cover ⒐ power wire ⒑ Lock nut ⒒⒓ paper thickness adjustment needle ⒔...

  • Page 9: Chapter 3 Set-Up, Operation And Maintenance

    ⒗ ⒘ long blade rotary blade ⒙ static-electric preventing hair ⒚ card collecting case ⒛ waste paper collecting case Chapter 3 Set-up, operation and maintenance In this chapter, the matters related to the machine set-up and the daily work flow is recorded. 1 Set-up 1-1 Way of set-up and flow sequence （1）Take the machine out of the package.

  • Page 10: Place And Conditions Where The Machine Is Placed

    magnetic switch. （4） Make the ground-wire grounded surely in order to eliminate the static electricity. Electric shock may occur in the case of an electric leak. （5） Please make sure the power switch to be in good connection. 1-2 Place and conditions where the machine is placed Please use this machine in the place as below: ●...

  • Page 11: Operation

    2. Operation 2-1. Cutting flow Rake cutting test upon the flow below in the initial use. Have the machine placed Turn on the power switch Press [start] key to let it idly move once, Detected with Detected with place the printing test used paper on paper mark ■...

  • Page 12: Operation Panel

    2-2 Operation panel (1) Back of the panel Parameter set Start (+)key Stop/Pause(-) key Mode change- Over key screen ● Mode changeover key: Standby, changeover the cutting mode ,Return standby state when set parameter. ● Parameter setting key: used to adjust the cutting size and set the cutting paper number ●...

  • Page 13: Datum Selection

    stops), the LCD in the standby state will display: ■ means the mark detection Empty means the front-end detection The set pieces to ■ be cut 0027 0000 Separate cumulation 89×40 * Sheet size The * is customize selected cutting mode 2-3 Datum selection 2-3-1 Two selections of datum...

  • Page 14: Cutting Mode

    2-4 Cutting mode 2-4-1 Rotating cutter group selection ①C-2-85, cutting 2 columns, cutting width 85mm, optional assembly ②C-2-89, cutting 2 columns, cutting width 89mm, standard allocation ③C-3-90, cutting 2 columns, cutting width 90mm, optional assembly ④C-2-95, cutting 2 columns, cutting width 95mm, optional assembly Please note the type of the rotating cutter group at order.
  • Page 15 e is the trim size. The card content should be completed within the bl ack dashed. 2-4-3 Cutting format A4(210*297) (85,89,90,95)mm×45mm PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn...
  • Page 16 A4(210*297) (85,89,90,95)mm×50mm PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn...
  • Page 17 A4(210*297) (85,89,90,95)mm×54mm PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn...
  • Page 18 A4(210*297) (85,89,90,95)mm×90mm PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn...
  • Page 19 A4(210*297) (85,89,90,95)mm×95mm PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn...
  • Page 20 A4(210*297) (85,89,90,95)mm×127mm PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn...
  • Page 21 (85,89,90,95)mm×（40-250）mm; customise PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn...

  • Page 22: Set The Parameters

    2-4-4 Setting method of the cutting mode Continually press the mold changeover key till the desired mode to be shown on the LCD screen. 2-5. Set the parameters 2-5-1 Set-up of the pieces to be cut Set the cut pieces when several A4 papers are to be automatically cut in once cutting.
  • Page 23 Way of detection: Way of detection: Mark ■ Front-end ② Select it via [+] or [ -] key. ③ Press the [Mode changeover] key to return to the standby state. 2-5-3 Select the language ①When [Parameter setting] key is pressed three times, the LCD will show →...
  • Page 24 Press [Parameter setting] once, LCD displays: [mark ■ posit compt] [+X.X] or [-X.X] Adjust it via [+] or [-] Need to djust? Press [Parameter setting] key twice, the Press [Mode changeover] LCD displays: [First cut comp] key to return to the standby [+X.X] or [-X.X] state, the size error adjustment Adjust it via [+] or [-]...
  • Page 25 1. Mark■ position compensation ① When [Parameter setting] key is pressed four times, the LCD will show Mark ■ posit comp : +0.00 mm ② Select it via [+] or [ -] key（Select from-2.0 to +2.0mm） ③ Press the [Mode changeover] k ey to return to the standby state.
  • Page 26 ① When [Parameter setting] key is pressed seven times, the LCD will show: Gutter comp: +0.00 mm ② Select it via [+] or [ -] key（Select from-2.0 to +2.0mm）. ③ Press the [Mode changeover] key to retur n to the standby state. 2-5-5 Check up the total accumulated cards ①...
  • Page 27 Slitting width: ② Select it (85,89, 90,95) via [+] or [-] key. ③Press the [Mode changeover] key to return to the standby state. 2-5-8 Select the sheet size ① When [Parameter setting] key is pressed eleven times, the LCD will show sheet size : ②...
  • Page 28 ② Press [+], [-] key, the ex-works set-up is recovered and the machine is restarted or press [Mode changeover] key to give up and return to the standby state. 2-5-11 Customize mode Operation method ① Continue pressing the [Mode changeover] key till the LCD displays: 00XX XXXX 89×135 *...

  • Page 29: Way Of Operations And Flow

    ⑦ Adjust it via [+] or [-] key. ⑧ Press the [Mode changeover] key to return to the standby state. 2-6 Way of operations and flow （1）Input the power When the power is turned on, the machine starts initiating and gets into the standby state.

  • Page 30: Way To Load And Unload The Rotary Blade Assembly

    （3）Set-up of both right and left positions of paper Move both left and right paper guide plates to suit the paper size and the 2 triangle marks on the paper feeding tray aligned with the center of the card cutting place in the first line. Use the micro-adjusting nut on the paper guide plate to adjust the paper tightness.
  • Page 31 Never touch the cutter to avoid injury. Take care of it in operation. ① Turn off the power switch. ② Remove the top cover. ③ Remove 4 fixing screws on the assembly. ④ Take the assembly out from the side of the casing. 2-7-2 Please follow the flow below when to load the assembly ①...

  • Page 32: Way Of Adjustment To Cut Different Thickness Of Paper

    2-8 Way of adjustment to cut different thickness of paper When out of factory, the thickness adjustment needle points to the middle, which means cutting 250g (about 0.25mm) thickness paper. (A) If cutting paper that thicker than 250g (or 0.25mm): ①...

  • Page 33: Troubleshooting

    3 Troubleshooting The buzzer will sound in case of a mistake with the safety device or paper jamming and the content of it will be shown on the liquid crystal screen and the machine will be changed to stop or stay at the standby state.

  • Page 34: Long Blade Jam

    (B) Settle it upon the way below in case of paper jamming with the paper feeding tray ① Turn off the power. ② Take out the paper piled up on the tray. ③ Pull the jammed paper outward. ④ Turn on the power and press<start> key, the paper feeding motor starts working.

  • Page 35: Black Mark■ Not Detected

    3-4 Black Mark■ not detected Reason: In the mark ■ detection mode, the mark ■ is not printed or does not conform to the set requirement. ① When the LCD shows: Black Mark■ not detected Press [Mode changeover], the LCD will show: <M>:EXIT <S>: ↓...

  • Page 36: Paper Is Too Narrow

    ② Press [Parameter setting] key and s elect [+] or [-] key to settle the problems: Press [Mode changeover] to EXIT; Press [Parameter setting] to make [+] to forward long blade work (press once for each cutting); Press paper; Press [-] to afterward paper (press once for each step) Press the [Mode changeover] key to return to the standby state.

  • Page 37: Bad Paper Feeding

    3-7 Bad paper feeding The paper guide plate is made too tightly, use the micro-adjusting nut to readjust it. (B) Paper feeding problem may occur in case of an improper paper. Please conform to the followings. ① Too thick (over 0.30mm), too thin (below 0.20mm) ②...

  • Page 38: After-Care

    4. After-care 4-1 Warranty Machine (main unit): Guaranteed for 6 months after purchase or cutting of 500,000 times (whichever comes first). Rotary blade: Guaranteed for 6 months after purchase or cutting of 1000,000 times (whichever comes first). Long blade: Guaranteed for 6 months after purchase or cutting of 1000,000 times (whichever comes first).

  • Page 39: System Troubleshooting Analysis

    5 System troubleshooting analysis 1: Normal use method, Paper requirements, Content Error Adjustment method. 1): Take the machine out the box, then put it on the iron case, the rubber pad shall align at the hole. The machine’s after end shall also shall subtend the square hole so that the wasted paper can fall into the iron case successfully.
  • Page 40 SSA-003-I Model or the SSA-001-I Model, it needs lock the black screw to match the paper putting place).
  • Page 41 cutting compensation or sign position compensation. When the card is forward gradually 0.5mm from the front-end mode,press the “Set parameter" to choice the first cutting compensation, then press the "-" key to reduce 0.5mm. If the error comes form measure black mark mode,press the "Set parameter”...
  • Page 42 panel's long circle hole.and the another side of the blade closed to the rotary blade bracket. To make sure that the tooth could match the machine completely. Then tight the 4 screws. 2): The side cover's assemble and disassemble Disassemble: take off the right cover（the side which has no operation panel called right cover).
  • Page 43 motor shields. The front of the triangle must put into the groove more than two-thirds. 4): How to change the long blade’s motor : Switch off the power, take off the motor shields, motor fixed frame and travel switch.. Then loosen the triangle screws by six concern screwdriver, the triangle and screw shall put out together.
  • Page 44 down.) 3: Trouble removal (Normally) 1): The paper can not enter into the machine or it just get into 2 pieces or 3 pieces at once. Reason: When the paper thickness is exceed 0.25mm, the paper can not enter into the machine smoothly. Or the paper thickness less than 0.25mm, it will just get into the machine 2 or 3 paper.
  • Page 45 model on the circuit board, check the wire whether loose or not, if it loose, insert it. 3): When the machine start, but the operation boundary shows the paper planet was wrong. it also due to the wire is bad contact, do the same as the second method.
  • Page 46 loosen the screws and the triangle iron, move the blade forced to make the it running. When the blade running smoothly, reset the blade. 7): When it show the “paper jam”, there are some wasted paper still in the machine or the wire is bad contact. tear down the long blade assembly, clean up the wasted paper .Open the left cover to check the wire.

Table of Contents